User Manual
Setting the precount
A metronome count can be sounded before starting recording/playback.
1.
Select MENU > METRONOME > PRE COUNT.
2.
Use to select the precount behavior, and press .
Setting values Explanation
OFF No precount will sound.
1–8
Before recording/playback, the precount will sound for the set number of times
(1–8).
SPECIAL
Before recording/playback, the precount will sound as shown below.
NOTE
• The precount is enabled even during playback.
• This function cannot be used with the AUTO REC function. When you turn AUTO REC on, PRE COUNT
will be disabled.
• This function cannot be used with the PRE REC function. When you turn PRE COUNT on, PRE REC will
be disabled.
53