User Manual
#
USB button
This switches the signals input to channels 17/18 (or 19/20).
Lit: audio return signal output from the computer
Unlit: LINE input jacks
NOTE
Connect the to a computer as an audio interface. (→ "Connecting to a computer")
$
MUTE button
This mutes or unmutes signals.
To mute the channel, press this button to light it.
HINT
This has no effect on recording to the SD card.
%
SOLO button
When a SOLO button is ON, the pre-fader signal can be heard from the PHONES jack. At such times, the
SELECT knob will automatically select SOLO.
&
Level meter
This shows the signal level after adjustment by the channel fader.
Range shown: −48 dB – 0 dB
0 (Clipping level)
-9
-6
-3
-12
-15
-18
-21
-24
-27
-30
-48
(dBFS)
NOTE
If the actual channel fader position differs from the channel fader position recalled using the scene func-
tion, for example, the level meter will show the recalled fader position.
(
Channel fader
This adjusts the channel signal level in a range from −∞ to +10 dB.
7