User Manual

Changing the playback mode
1.
Open MENU > REC/PLAY > PLAY MODE.
2.
Use to select the play mode, and press .
Setting values Explanation
OFF
Only the selected project plays back. Playback continues even when the end of
a le is reached.
PLAY ONE
(single song playback)
Only the selected project plays back. Playback stops when the end of a le is
reached.
PLAY ALL
(all playback)
Every project from the selected one to the last one will be played back.
REPEAT ONE
(single song repeat play-
back)
The selected project will be played repeatedly.
REPEAT ALL
(all song repeat playback)
All projects in the selected folder will be played repeatedly.
Changing the input signal recording source
1.
Open MENU > REC/PLAY > REC SOURCE.
2.
Use to select the recording source, and press .
Setting values Explanation
PRE COMP Before compressor applied
POST COMP After compressor applied
NOTE
When PRE COMP is selected, the playback signal will be inserted before the compressor.
When POST COMP is selected, the playback signal will be inserted after the compressor.
83