Specifications

USB functions
Audio interface settings
70
Audio interface settings
When using the as an audio interface, you can make the following
settings. Refer to each section for details.
Making direct monitoring settings
Sound that is input to the can be output directly before
it passes through the connected computer or iPad. This
enables monitoring without latency.
1. Press .
2. Use to select
“INPUT&OUTPUT”,
and press
.
3. Use to select
“Direct Monitor”,
and press
.
4. Use to select
“On”, and
press
.
Input settings Low cut filter (P.78)
Compressor/limiter (P.79)
Direct monitoring (P.70)
MS-RAW monitoring (P.82)
Phantom power (P.87)
Plug-in power (P.88)
Loop Back function (P.71)
Mixer (P.72)
VU meters (P.89)
Tool Tuner (P.74)