Operator`s manual
• Do not attach paper clips, staples, or rubber bands to disks.
• Do not try to open the sliding shutter th
at covers the disks (Figure 10 on
page 24).
• Never touch the exposed disk area benea
th the sliding shutter.
CAUTION: Keep disks away from magnets and magnetized objects, includin g
telephones, power-supply adapters
,andmonitors.
Operation and Sto rage
The PRM and ZWT requi re special handling. The hard-disk drive and the
floppy-disk drive of the PRM must be protected from abusive han dli ng. To
protect the PRM and ZWT f rom damage, r
efer to the following information:
• Do n ot turn off the PRM while the drive is accessing data.
• Do not subject the PRM and ZWT to abusive shocks or vibrations.
• When transporting the PRM and ZWT fr
om an outside environment to an
inside environment, allow the PRM to acclimate t o ambi ent temperature
before use.
• Do not pla c e heavy objects on the PRM surface when cl osed or when
in operation.
• Do not place a magnet on the PRM or ZWT.
• Do not pour or splash liquid into o
r onto the PRM or ZWT.
• Do not strike, scratch, nick, or otherwise abuse the touchscreen surface.
• Do not disassemble the PRM or ZWT.
• Remove any di sks from the drive pri
or to transporting the PRM.
• Turn off the PRM, close all covers and doors, and put down the antenna
prior to transporting the PRM.
• Unplug all external cables and cords prior to transporting the PRM.
• Carefully se cure the stylus in its hold ing tray before closing the PRM’s
cover.
Operate t he PRM, ZWT and accessories within the following conditions:
• Temperature range of 10°C to 35°
C (50°F to 95°F)
• Humidity between 25% and 90%
Transport and store the PRM and ZWT within the following conditions:
• Temperatures between -40°C and 7
0°C (-4 0°F and 158°F)
• Humidity of 25% to 95%
• Pressure of 50 kPa to 106 kPa (7.252 psi to 15.374 psi)
If the PRM has been stored in cold c
onditions (less than 10°C [50°F]) or warm
conditions (more than 35°C [95°F]), turn it on and let the fan run for at least
one h our befo re use. The PRM and ZWT are capable of continuous op eration
and will not shut off automatica
lly if they are unused f or an extended period
of time or if the PRM runs out of paper. Kee p the air intake and outlet free
from obstruction.
25