Operation Manual

Reference [Pad Sampler]
ZOOM MRS-1608
132
5.
Use the cursor left/right keys to bring up
the indication “SPL PRG COPY” on the
display, and press the [ENTER] key.
The sampler program that will be used as copy source
appears on the display.
6. Turn the dial to select the desired sampler
program, and press the [ENTER] key.
The sampler program that will be used as copy
destination appears on the display.
7.
Turn the dial to select the sampler program
to be used as copy destination and press
the [ENTER] key.
The indication “PRG COPY SURE?” appears on the
display.
8.
To execute the copy process, press the
[ENTER] key.
When the copy operation is completed, the unit returns to
the rhythm pattern or rhythm song selection screen.
To return to the main screen, press the [EXIT] key several
times.
Deleting a sampler program
You can delete an unneeded sampler program as follows.
NOTE
A deleted sampler program cannot be restored. Use this
operation with care.
1. From the main screen, press the [RHYTHM]
key, so that the key lights up.
2. Press the [DRUM] and [BASS] keys in the
rhythm section simultaneously.
Both keys light up. In this condition, the pad sampler can
be used.
3. Press the [UTILITY/TRACK EDIT] key.
The display changes as follows.
4. Verify that the indication “UTILITY SPL
PRG” is shown, and press the [ENTER] key.
The sampler program menu appears.
5.
Use the cursor left/right keys to bring up
the indication “SPL PRG DELETE” on the
display, and press the [ENTER] key.
The sampler program that will be deleted appears on the
display.
SPL PRG
SPL PRG
SELECT
SELECT
PRG COPY
PRG COPY
SPL PRG0
SPL PRG0
PRG:0
PRG:0
Copy source
program number
Copy source
program name
PRG COPY
PRG COPY
COPY TO
COPY TO
PRG:1
PRG:1
Copy destination program numbe
r
UTILITY
UTILITY
SPL PRG
SPL PRG
SPL PRG
SPL PRG
SELECT
SELECT
PRG DEL
PRG DEL
SPL PRG0
SPL PRG0
PRG:0
PRG:0
Program number
to be deleted
Program name
to be deleted
1608E.book 132 ページ ２００４年４月１９日 月曜日 午前１０時４４分