Operation Manual

Reference [Pad Sampler]
ZOOM MRS-1608
135
6.
Press the PLAY [
R
] key while holding down
the REC [
O
] key.
A pre-count of four beats is heard, and then rhythm
pattern recording starts.
7. While listening to the metronome, tap the
pads.
Your performance of the pad sampler will be recorded as
a drum sequence.
By pressing the REC [
O
] key during recording, you can
pause the recording to rehearse and switch pad banks.
Press the REC [
O
] key again to continue.
HINT
Instead of tapping the pads, you can also use a MIDI
controller connected to the MRS-1608’s MIDI IN connector.
8. To edit the recorded contents during real-
time input, proceed as follows.
● To erase the performance of a specific pad
While holding down the [DELETE/ERASE] key, press
the pad whose assigned sample sound you want to erase.
While you are holding down both keys, the information
for the corresponding pad is erased from the rhythm
pattern.
● To erase the performance of all pads
While holding down the [DELETE/ERASE] key, press
the [DRUM] status key. While you are holding down both
keys, the performance of all pads is erased.
9. When you have finished real-time
recording, press the STOP [P ] key.
The rhythm pattern stops.
10. To play the resulting rhythm pattern, press
the ZERO [U ] key to return to the
beginning of the rhythm pattern, and then
press the PLAY [R ] key.
When the contents of the pattern are as desired, press the
STOP [
P
] key to stop the rhythm pattern, and then press
the [EXIT] key several times to return to the main screen.
HINT
Creating a rhythm pattern using drum sequence step input is
also possible.
You can record your pad sampler play on an audio track.
This is useful to add effect sounds in real time while
listening to other audio tracks.
NOTE
• When a programmed rhythm pattern/rhythm song is selected
while recording is carried out, the contents will be played back
and the pad sampler sounds will be activated by the rhythm
pattern or rhythm song. To record only your pad play, select
an empty rhythm pattern/rhythm song.
• The pad sampler and drum kit/bass program cannot be used
concurrently. To use a rhythm pattern or rhythm song with
drum/bass together with the pad sampler, record the rhythm
pattern play on an audio track first (
→
p. 44).
1. From the main screen, press the [UTILITY/
TRACK EDIT] key.
The indication “UTILITY TR EDIT” appears on the
display.
2. Use the cursor left/right keys to bring up
the indication “UTILITY BOUNCE” on the
display, and press the [ENTER] key.
The display indication changes as follows.
3.
Use the cursor left/right keys to bring up
the indication “BOUNCE REC SRC” on the
display, and press the [ENTER] key.
In this condition, you can select the bounce recording
source.
4. Turn the dial to change the setting to
“DRUM TR”, and press the [EXIT] key
several times to return to the main screen.
When you carry out bounce recording in this condition,
you can record the pad sampler signal (drum track) onto
any audio track.
Recording pad sampler play
on an audio track
BOUNCE
BOUNCE
REC TAKE
REC TAKE
REC SRC
REC SRC
MASTER
MASTER
1608E.book 135 ページ ２００４年４月１９日 月曜日 午前１０時４４分