Operation Manual

Reference [Projects]
ZOOM MRS-1608
166
● PROJECT SEQ PLAY
Continuously play the master tracks from several projects
saved on the hard disk ( → p. 177).
3. Press the [ENTER] key to execute the
operation (or change the setting) that you
selected.
For details on the procedure, refer to the sections that
follow.
4. To return to the main screen, press the
[EXIT] key several times.
Depending on which selection was made in step 2, the
main screen may return automatically.
Loading a project
You can select a project that was saved on the hard disk,
and load it.
1. Refer to steps 1 – 2 of “Basic procedure” to
bring up the indication “PROJECT
SELECT” on the display. Then press the
[ENTER] key.
The name and number of the project to be loaded are
shown on the display.
2. Turn the dial to select the desired project.
3. Press the [ENTER] key to load the project.
When loading is completed, the unit returns to the main
screen. By pressing the [EXIT] key instead of the
[ENTER] key, you can cancel the operation and back up
one step at a time.
HINT
When power to the MRS-1608 is turned on, the project that
was last worked on will be loaded automatically.
Creating a new project
This operation creates a new project.
1.
Refer to steps 1 – 2 of “Basic procedure” to
bring up the indication “PROJECT NEW” on
the display. Then press the [ENTER] key.
The project to create is shown on the display.
The number of the newly created project is assigned
automatically, choosing the lowest free project number,
and a default name of “PRJxxx” (where xxx is the project
number) will be assigned.
The first character of the project name flashes. This
indicates that you can change the project name.
2. If necessary, edit the project name.
To change the project name, use the cursor left/right keys
to move the flashing section to the character you want to
change, and turn the dial to select the new character. The
project name can also be edited later ( → p. 168).
3. Press the [ENTER] key to create the
project.
After the new project has been created, it is loaded
automatically, the unit returns to the main screen. By
pressing the [EXIT] key instead of the [ENTER] key, you
can cancel the operation and back up one step at a time.
HINT
If the recorder is stopped and the main screen is shown, you
can call up the screen of step 1 simply by pressing the [NEW
PROJECT] key.
PRJ SEL
PRJ SEL
PRJ001
PRJ001
PRJ 001
PRJ 001
Project numberProject name
PRJNo003
PRJNo003
PRJ003
PRJ003
OK?
OK?
Project number
Project name
1608E.book 166 ページ ２００４年４月１９日 月曜日 午前１０時４４分