Operation Manual

Installing the CD-R/RW Drive

ZOOM MRS-1608

Rear Panel

Flat cable

Power cable

Front Panel

Plug the power cable and ﬂat cable

from the main unit into the respective

connectors on the CD-R/RW drive.

Push the CD-R/RW drive all the way into the bay,

so that the screw holes on the bottom of the

MRS-1608 and the screw holes of the CD-R/RW

drive are aligned.

Fasten the CD-R/RW drive with the four supplied

panhead screws. Then reattach the bottom plate

with the screws removed in step 2.

NOTE

• Use only the dedicated CD-R/RW drive CD-01 or CD-02 made by

ZOOM Corporation.

• ZOOM Corporation will not accept any responsibility for damage or

third-party claims arising from using any other drive.

1608E.book 18 ページ２００４年４月１９日　月曜日　午前１０時４４分