Operation Manual
Quick Tour
ZOOaM MRS-1608
24
5.
To change the tempo, press the [TEMPO] key
in the rhythm section and then turn the dial to
change the tempo value shown on the
display.
The tempo value can be set in 0.1 BPM steps.
When the setting is complete, press the [EXIT] key to return
to the previous screen.
HINT
You can also set the tempo by tapping the [TEMPO] key
repeatedly (
→
p.89).
6.
Use the [DRUM]/[BASS] faders to adjust the
volume of the drum/bass track.
If bass sound is not desired, turn the [BASS] fader all the
way down.
7.
To stop playback, press the STOP [P
] key.
8.
To return to the main screen, press the [EXIT]
key several times.
In this step, you record the first track while listening to the
guide rhythm of the rhythm section. As an example we
describe how to record an electric guitar on track 1 with the
insert effect.
2.1 Adjusting input sensitivity
1.
Connect an instrument to the GUITAR/BASS
INPUT jack 1 (
→
p. 15).
To connect a guitar or bass, use the front panel GUITAR/
BASS INPUT jacks 1/2. To connect a synthesizer or other
component with line-level stereo output, use the rear panel
INPUT 1 – 8 jacks.
HINT
You can use either GUITAR/BASS INPUT jack 1 or INPUT jack 1,
and either GUITAR/BASS INPUT jack 2 or INPUT jack 2. If both
jacks are connected, the GUITAR/BASS INPUT jacks 1/2 are
given priority.
2.
From the main screen, press the input 1
[ON/OFF] key so that the key lights up in red.
The [ON/OFF] keys 1 – 8 in the input section control the
status of inputs 1 – 8. When a key is lit, the corresponding
input is turned on.
HINT
To record the output of a synthesizer or other stereo component
in stereo, connect the L and R output to a pair of odd/even-
numbered INPUT jacks, and press the corresponding [ON/OFF]
keys so that both keys are lit.
3.
While playing the instrument, use the
[GUITAR/BASS INPUT] control 1 to adjust
sensitivity.
When the instrument is connected to GUITAR/BASS
INPUT 1/2, use the [GUITAR/BASS INPUT] control 1/2.
When the instrument is connected to INPUT 1 – 8, use the
[INPUT] control 1 – 8 to adjust the input sensitivity.
Adjust the control so that the [PEAK] indicator in the input
TEMPO
TEMPO
BPM:
BPM:
136.0
136.0
Step 2: Recording the first track
1608E.book 24 ページ ２００４年４月１９日 月曜日 午前１０時４４分