Operation Manual
Quick Tour
ZOOM MRS-1608
29
When you have finished recording all tracks, you can use the
built-in mixer to adjust parameters such as volume level, EQ
(equalizer), and panning (stereo left/right positioning) to
create a pair of stereo tracks.
4.1 Turning off the input and
rhythm section
In order to keep unwanted signals from being included in the
mix, you should turn off the input and the guide rhythm from
the rhythm section.
1.
To mute the rhythm section, press the
[DRUM]/[BASS] status keys so that the keys
go out.
2.
To mute the input, press the [ON/OFF] key for
the input where the instrument is connected,
so that the key goes out.
HINT
If desired, you can add the drum kit/bass program sound and/or
sound from input signals to the mix.
4.2 Adjusting volume, panning,
and EQ
Adjust the volume, panning, and equalization for each track
by controlling the track parameters of the built-in mixer.
1.
To adjust the volume balance between tracks,
operate faders 1 – 8, and faders 9/10 – 15/16.
By operating faders of a pair of stereo tracks, you can adjust
the left/right balance.
2.
To adjust the EQ and panning for each track,
press the respective key in the track
parameter section.
3.
Use the cursor left/right keys or the status
keys to select the track for which you want to
make a setting.
While the track parameter display is shown, the status keys
and cursor left/right keys can be used to select a track. The
status key for the currently selected track is lit in orange.
4.
Turn the dial to select the setting value.
5.
Use the cursor up/down keys or the keys in
the track parameter section to select a track
parameter, and adjust other parameters in
the same way.
When a parameter is displayed, pressing the corresponding
key in the track parameter section toggles the parameter
between on and off.
The parameters that can be selected for tracks 1 – 8 and
tracks 9/10 – 15/16 are listed in the table on the next page.
HINT
• In the default condition of a project, the SUB-OUT SEND LVL
and SUB-OUT SEND PAN parameters are turned off. For
information on how to control these parameters, see page 82.
• Some track parameters (level, EQ, panning/balance, send/
return effect intensity etc.) can also be used for the drum/bass
track and input signals.
Step 4: Mixing
Orange
TR3
TR3
EQ HI G
EQ HI G
0dB
0dB
TR3
TR3
EQ HI G
EQ HI G
+6dB
+6dB
1608E.book 29 ページ ２００４年４月１９日 月曜日 午前１０時４４分