Operation Manual
Quick Tour
ZOOM MRS-1608
31
4.3 Applying the send/return
effect
The track signals sent to the internal mixer can be processed
by an effect that is connected internally to the send/return
loop of the mixer. (This is called a send/return effect.) The
MRS-1608 incorporates two kinds of send/return effects
(chorus/delay and reverb).
The intensity of the send/return effect can be adjusted for
each track by using the send level parameter (which controls
the signal level that is sent to the effect). Increasing this
parameter will result in stronger effect action. This section
describes how to select the send/return effect type and adjust
the send level for each track.
◆
Selecting the send/return effect patch
1.
From the main screen, press the [CHORUS/
DELAY] key or [REVERB] key in the effect
section.
Press the [CHORUS/DELAY] key to select a chorus/delay
patch, or the [REVERB] key to select a reverb patch.
The display will indicate the patch that is currently selected
for the effect you selected. For example, a screen such as
shown below appears when the [REVERB] key is pressed.
2.
Turn the dial to select a patch.
Each send/return effect has 30 preprogrammed patches
(numbered 0 – 29). If desired, you can edit these patches to
modify the effect further (
→
p. 147).
3.
Select the patch for the other send/return
effect in the same way.
4.
To return to the main screen, press the [EXIT]
key several times.
HINT
In the project default condition, the send level for the send/return
effect is set to zero for each track. Therefore you need to raise
the setting to verify the sound produced by the effect.
◆
Adjusting the send/return effect intensity
for each track
5.
From the main screen, press the [CHORUS/
DELAY SEND] key or [REVERB SEND] key in
the effect section, to set the respective level .
The display will indicate the send level that is currently set
for the effect. For example, a screen such as shown below
appears when the [REVERB SEND] key is pressed.
6.
Use the cursor left/right keys or the status
keys to select the track for which you want to
adjust the send level.
7.
While playing the song, turn the dial to adjust
the send level value.
8.
Adjust the send level for other tracks in the
same way.
9.
Adjust the intensity of the other send/return
effect in the same way.
10.
To return to the main screen, press the [EXIT]
key several times.
DRUM BASS
12 15/16
MASTER
REVERB
CHORUS/
DELAY
REVERB
SEND LEVEL
CHORUS/
DELAY
SEND LEVEL
Return
Send
Patch numberPatch name
SEND REV
SEND REV
TightHal
TightHal
No.0
No.0
Send level setting
TR3
TR3
REV SEND
REV SEND
0
0
1608E.book 31 ページ ２００４年４月１９日 月曜日 午前１０時４４分