Operation Manual
Reference [Track Editing]
ZOOM MRS-1608
51
The display indication changes as follows.
7.
Specify the copy destination start point in
the same way as for the copy source, and
press the [ENTER] key.
The indication “COPY SURE?” appears on the display.
8.
To execute the copy operation, press the
[ENTER] key.
When the copy operation is completed, the unit returns to
the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
HINT
To paste the same range repeatedly, use the phrase loop
function (
→
p. 67).
Moving a specified range of data
You can move the audio data of a specified range to a
specified position on a specified track/V-take. This action
will overwrite the existing data at the destination
location. The move source data will be erased.
1.
Refer to steps 1 – 6 of “Basic steps for
range editing” to select the move source
track/V-take, and press the [ENTER] key.
The display indication changes to “Move Src START”.
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the move start point.
3.
Press the [ENTER] key.
The display indication changes to “Move Src END”.
4.
Use the same procedure as in step 2 to
specify the move range end point.
If you press the PLAY [R
] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
The display changes to let you specify the move
destination track/V-take.
6.
Specify the move destination track/V-take
in the same way as when selecting the
move source track/V-take, and press the
[ENTER] key.
The display changes to the screen for specifying the move
destination start point.
7.
Specify the move destination start point in
the same way as for the move source, and
press the [ENTER] key.
The indication “MOVE SURE?” appears on the display.
8.
To execute the move operation, press the
[ENTER] key once more.
When the move operation is completed, the unit returns
to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Copy Dst
Copy Dst
TO
TO
0 2
2
13
13
0
0
058
058
3
3
0
0
00
00
Move source track
Move target track
Move
Move Src
Move Src
START
START
0 0
0
0
0
0
0
001
001
1
1
0
0
00
00
Move Src
Move Src
END
END
0 0
0
42
42
230
230
032
032
4
4
12
12
00
00
Move Dst
Move Dst
TR 1- 1
TR 1- 1
Move Dst
Move Dst
TO
TO
0 0
0
42
42
230
230
032
032
4
4
12
12
00
00
1608E.book 51 ページ ２００４年４月１９日 月曜日 午前１０時４４分