Operation Manual

Reference [Track Editing]
ZOOM MRS-1608
61
HINT
The manual and automatic punch-in/punch-out functions
can also be used at this point.
11.
To start Duo Harmony generation, hold
down the REC [
O
] key and press the PLAY
[
R
] key.
12.
When recording has progressed to the
point where you want harmony generation
to stop, press the STOP [
P ] key.
The indication “DUO HARM SURE?” appears on the
display.
13. To confirm the operation, press the
[ENTER] key.
The editing result is written to the track. When the
process is complete, the unit returns to the track edit
menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Recorded audio data can also be edited in V-take units.
This is convenient to exchange the data on two V-takes or
delete a V-take that is no longer needed. The procedure is
explained in this section.
Basic steps for V-take editing
When editing audio data in V-take units, some steps are
similar for each action. These are as follows.
1. From the main screen, press the [V-TAKE]
key in the track parameter section.
The key lights up, and a screen for selecting the V-take
appears on the display.
While this screen is shown, the level meter section of the
display indicates the V-take selection and the presence or
absence of audio data by the segment flashing/lit/out
status.
2. Use the cursor left/right keys and the dial to
select a track and V-take.
The status key for the currently selected track is lit in
orange. Alternatively, you can press a status key to select
a track.
It is also possible to select the master track. In this case,
the track number indication shows “M”.
Editing using V-takes
TR 1- 1
TR 1- 1
GTR 1- 1
GTR 1- 1
1
2
3
4
5
6
7
8
9
10
V-takes
Tracks
Lit: recorded V-take
Flashing: currently selected V-take
Out: unrecorded V-take
1608E.book 61 ページ ２００４年４月１９日 月曜日 午前１０時４４分