Operation Manual

Reference [Phrase Looping]
ZOOM MRS-1608
71
import process. When the process is complete, the phrase
menu appears again.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a time.
HINT
The name “PHxxx-yy” is automatically assigned to the
loaded phrase (where xxx is the current project number and
yy the phrase number).
NOTE
Imported audio files are always played with a sampling
frequency of 44.1 kHz. If resampling was disabled during the
import process, a file with a different sampling frequency will
play back with a different pitch and tempo.
Importing a phrase from a different
project
You can import any phrase contained in the phrase pool
of another project stored on the hard disk.
NOTE
• When you import a phrase from the phrase pool of another
project, you cannot specify a range. If necessary, edit the
phrase playback point after importing the phrase.
• The following procedure will not allow you to first listen to
the phrase. Confirm name and number of the phrase
before you start the procedure.
1.
Refer to steps 1 – 6 of “Basic phrase
loading steps” to select “PHRASE” as
import source. Then press the [ENTER] key.
The indication “PRJ SEL xxx” (where xxx is the project
name) appears on the display. You can now select the
source project.
2. Turn the dial to select the source project,
and press the [ENTER] key.
The display now shows the screen for selecting phrases in
that project.
HINT
If the selected project does not contain any phrases, the
indication “NO DATA” appears on the display for several
seconds, and then the previous screen returns.
3.
Turn the dial to select the phrase, and press
the [ENTER] key.
The indication “IMPORT SURE?” appears on the
display.
4. To carry out the import process, press the
[ENTER] key once more.
The phrase is imported. When the import process is
completed, the phrase menu appears again.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Adjusting phrase parameters
Once you have imported a phrase into the phrase pool,
you will need to specify parameters such as playback
range and number of measures.
1.
From the main screen, press the [UTILITY/
TRACK EDIT] key in the display section.
The indication “UTILITY TR EDIT” appears on the
display.
2. Use the cursor left/right keys to bring up
the indication “UTILITY PHRASE” on the
display, and press the [ENTER] key.
The phrase screen appears on the display.
3. Turn the dial to select the phrase that you
want to edit.
When you press the PLAY [
R
] key, the selected phrase
is played. If you select a number where no phrase is
Project number
Project name
PRJ SEL
PRJ SEL
PROJ004
PROJ004
PRJ 004
PRJ 004
Phrase numberPhrase name
PHRASE
PHRASE
PH003-02
PH003-02
No.2
No.2
PHRASE
PHRASE
REST
REST
No.0
No.0
1608E.book 71 ページ ２００４年４月１９日 月曜日 午前１０時４４分