Specifications

Reference [Effects]
ZOOM MRS-1608
143
COMP
PRE AMP/DRIVE
COMPRESS
COMPRESS
PRE/DRV
PRE/DRV
EQ
3BandEQ
3BandEQ
MODULATION/DELAY
MOD/DLY
MOD/DLY
ZNR, VOL PDL, PAT LVL
TOTAL
TOTAL
COMP/LIM
MICPRE+DE-ESSER
COMP/LIM
COMP/LIM
MIC PRE
MIC PRE
EQ
3BandEQ
3BandEQ
MODULATION/DELAY
MOD/DLY
MOD/DLY
ZNR, VOL PDL, PAT LVL
TOTAL
TOTAL
COMP/LIM
MICPRE
COMP L
COMP L
MicPre L
MicPre L
EQ
EQ L
EQ L
DELAY
DELAY L
DELAY L
ZNR, VOL PDL, PAT LVL
TOTAL
TOTAL
COMP/LIM
ISOLATOR
COMP/LIM
COMP/LIM
ISOLATOR
ISOLATOR
EQ
3BandEQ
3BandEQ
MODULATION/DELAY
MOD/DLY
MOD/DLY
ZNR, VOL PDL, PAT LVL
TOTAL
TOTAL
3BAND COMP/LO-FI
NORMALIZER
CMP/LoFi
CMP/LoFi
NORMLZR
NORMLZR
EQ
3BandEQ
3BandEQ
DIMENSION/
RESONANCE
DIM/RESO
DIM/RESO
ZNR, VOL PDL, PAT LVL
TOTAL
TOTAL
HPF1
HPF1
HPF2
HPF2
HPF8
HPF8
VOL PDL, PAT LVL
TOTAL
TOTAL
LINE
MASTERING
CLEAN
DIST
ACO/BASS sim
BASS
MIC
DUAL MIC
8x COMP EQ
Algorithm Module indication
type, the effect parameter arrangement also changes.)
This section explains how to edit the effect type and effect
parameters for the currently selected patch.
1. Use the [ALGORITHM] keys to select the
algorithm, and then use the PATCH SELECT
[W
]/[Q ] keys or the dial to select the patch to
edit.
It is not possible to later change the algorithm of a patch. For
this reason, you must first begin by selecting a patch that
uses the desired algorithm, even to create a patch from the
beginning.
HINT
The indication “EMPTY” appears instead of the patch name if
the patch is empty. By editing such a patch, you can create a
patch from the beginning.
2. Press the [EDIT] key.
The first line of the display will indicate the effect module
type, followed by “EDIT”. This means that the patch can
now be edited.
3. Use the cursor left/right keys to select the
effect module to edit.
The indication shown on the first line for the various effect
modules is as follows.
HINT
•To edit the ZNR/VOL PDL module, bring up the indication
“TOTAL” on the first line of the display.
• In the DUAL MIC algorithm, the modules assigned to the L
and R channels can be edited separately. The indication “L”
on the first line of the display means that the module for the
left channel is selected. The indication “R” means that the
module for the right channel is selected.
• The 8x COMP EQ algorithm has one high-pass filter,
compressor, and EQ per channel, with individual on/off
control. The number of the channel currently selected for
operation is shown on the first line of the display.
MODULATION/
DELAY
CHORUS
DEPTH
RATE
MIX
FLANGER
DEPTH
RATE
FB
PHASER
POSITION
RATE
COLOR
Effect
module
Effect
type
Effect
parameters
COMPRESS
COMPRESS
SENS
SENS
Effect module type
MOD/DLY
MOD/DLY
CHORUS
CHORUS
1608E.book 143 ページ ２００４年４月１９日 月曜日 午前１０時４４分