User's Manual

Reference [Projects]
ZOOM MRS-8
105
• PROJECT NAME
Edit the name of the currently loaded project.
• PROJECT PROTECT
Switch the protection status of the currently loaded
project on or off.
• PROJECT SEQ PLAY
Continuously play the master tracks from several projects
saved on the SD card (sequence play).
HINT
For details on the sequence play function, see page 111.
4.
Press the [ENTER] key to execute the
operation (or change the setting) that you
selected.
For details on the procedure, refer to the sections that
follow.
5.
To return to the main screen, press the
[EXIT] key repeatedly.
Depending on which selection was made in step 3, the
main screen may return automatically.
You can select a project that was saved on the SD card,
and load it.
HINT
When power to the MRS-8 is turned on, the project that was
last worked on will be loaded automatically.
1.
Refer to steps 1 – 3 of “Basic procedure” to
bring up the indication “PROJECT
SELECT” on the display. Then press the
[ENTER] key.
The name and number of the project to be loaded are
shown on the display.
2.
Turn the dial to select the desired project.
3.
Press the [ENTER] key to load the project.
When loading is completed, the unit returns to the main
screen. By pressing the [EXIT] key instead of the
[ENTER] key, you can cancel the operation and back up
one step at a time.
This operation creates a new project on the SD card.
1.
Refer to steps 1 – 3 of “Basic procedure” to
bring up the indication “PROJECT NEW” on
the display. Then press the [ENTER] key.
The name and number of the project to create are shown
on the display.
The number of the newly created project is assigned
automatically, choosing the lowest free project number,
and a default name of “PRJxxx” (where xxx is the project
number) will be assigned.
The project name is shown with a cursor on the first
character. This indicates that you can change the project
name.
2.
If necessary, edit the project name.
To edit the name, use the cursor left/right keys and the
dial or the pads and keys in the rhythm section to input a
character. For details on entering characters, see page 33.
3.
To create the project, press the [ENTER]
key.
The newly created project is loaded automatically, and
the unit returns to the main screen.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
HINT
• The project name can also be edited later ( → p. 107).
• If the recorder is stopped and the main screen is shown, you
can call up the screen of step 1 simply by pressing the [NEW
PROJECT] key.
Loading a project
PRJ SEL
PRJ SEL
PRJ000
PRJ000
0
Project name Project number
Creating a new project
PRJNo001
PRJNo001
PRJ001
PRJ001
Project number
Project name
MRS-8(E).book 105 ページ ２００４年７月３０日 金曜日 午後５時２４分