User's Manual

Reference [Projects]
ZOOM MRS-8
107
This operation lets you edit the name of the currently
loaded project.
1.
Refer to steps 1 – 3 of “Basic procedure” to
bring up the indication “PROJECT NAME”
on the display. Then press the [ENTER] key.
The display changes as follows.
A cursor appears on the first character of the project
name.
2.
Use the cursor left/right keys and the dial or
the pads and keys in the rhythm section to
input a character.
For details on entering characters, see page 33.
To return to the main screen after editing the name, press
the [EXIT] key repeatedly.
This operation lets you write-protect the currently loaded
project, which disables project saving and editing. When
protect is ON, the following operations will not be
allowed.
• Erasing a project
• Editing or recording on the recorder
• Changing the V-take
• Editing a patch for the insert effect and send/return
effect
• Recording or editing a rhythm pattern or rhythm
song
• Setting or deleting marker information
• Changing the names of various data
HINT
A project that has been protected can still be played
normally, and you can change the mixing balance and make
certain other changes, but the changes cannot be saved.
1.
Refer to steps 1 – 3 of “Basic procedure” to
bring up the indication “PROJECT
PROTECT” on the display. Then press the
[ENTER] key.
The display changes as follows.
2.
Turn the dial to select ON (protect enabled)
or OFF (protect disabled).
If protect is ON for the project, a lock icon is shown in the
bottom right of the main screen.
A change in the protect status becomes active
immediately. To return to the main screen after making
the setting, press the [EXIT] key repeatedly.
NOTE
A project that is not protected will be automatically saved on
the SD card every time the power is turned off or the project
menu is called up. If you have finished a song, we
recommend to turn protect ON. This will prevent
inadvertently saving changes caused by operation steps that
you have taken after finishing the song.
Changing the project name
Protecting a project
PRJ NAME
PRJ NAME
±RJ001
RJ001
Cursor
PRJ PRT
PRJ PRT
OFF
OFF
PRJ 008
PRJ 008
PRJ008
PRJ008
1- 0 0 0 1- 0
00
Lock icon
MRS-8(E).book 107 ページ ２００４年７月３０日 金曜日 午後５時２４分