User's Manual

Reference [Other Functions]
ZOOM MRS-8
112
(1) Project number/project name
Shows the number and name of the project registered in
the playlist.
(2) V-take duration
Shows the playing time of the V-take selected for the
master track of the registered project, in minutes,
seconds, and milliseconds.
(3) Playback number
Shows the playback position of the project.
NOTE
•Projects in which an unrecorded V-take is selected for the
master track cannot be registered in a playlist. If the name of
a desired project does not appear on the display, check
whether a recorded V-take is selected for the master track.
•A master track whose selected V-take is extremely short (4
seconds or less) cannot be registered in a playlist.
7.
Press the cursor right key.
The display changes as follows.
In this condition, you can select the second project to
play.
8.
Turn the dial to select the next project to
play.
Use the same procedure to select projects for subsequent
positions. A maximum of 99 projects can be registered in
a playlist.
To edit the contents of a playlist, proceed as follows.
•To change projects in a playlist
Use the cursor left/right keys to select the position
number for which you want to change the project, and use
the dial to select another project.
•To insert a project in a playlist
Use the cursor left/right keys to select the position
number where you want to insert a project. Press the
[FUNCTION] key in the display section twice. (The
indication “INSERT?” appears on the display.) Turn the
dial to select another project, and press the [ENTER] key.
The project is inserted and subsequent projects are
renumbered.
•To delete a single project from a playlist
Use the cursor left/right keys to select the position
number of the project to delete. Press the [FUNCTION]
key in the display section. (The indication “DELETE
SURE?” appears on the display.) Press the [ENTER] key.
The project is deleted and subsequent projects are
renumbered.
•To delete all projects from a playlist
On the playlist registration screen, press the
[FUNCTION] key in the display section. (The indication
“DELETE SURE?” appears on the display.) Press the
cursor down key. (The indication “ALL DEL SURE?”
appears on the display.) To carry out the operation, press
the [ENTER] key.
•To switch the V-take for the master track
Press the [EXIT] key repeatedly to return to the main
screen. Load the project for which you want to switch the
V-take, and select the V-take for the master track. Then
return to the playlist registration screen.
9.
When you have registered all desired
projects in the playlist, press the [EXIT] key
repeatedly to return to the main screen.
NOTE
• The playlist can be edited and played from any project.
• If the V-take data of the master track of a project registered in
a playlist are deleted from the SD card, or when the V-take
selection has been changed to an empty V-take, the
respective playlist becomes empty.
Select the playlist for continuous project playback as
follows.
1.
From the main screen, press the [SYSTEM
UTILITY] key in the display section.
The display changes as follows.
2.
Press the [ENTER] key.
The project menu for various project related functions
appears.
END OF
END OF
LIST
LIST
2
Playing a playlist
SYSTEM
SYSTEM
PROJECT
PROJECT
MRS-8(E).book 112 ページ ２００４年７月３０日 金曜日 午後５時２４分