User's Manual

ZOOM MRS-8
12
Synthesizer or sampler etc.
Dynamic or condenser microphone
R
L
MIDI IN
Monitor system (audio components or amplified speakers etc.)
MIDI sequencer (computer etc.)
AC adapter
To monitor the sound with headphones,
connect a pair of headphones to the
PHONES jack. The listening volume can
be adjusted with the PHONES control.
To prevent damage to the speakers of your
monitor system, turn off the power of the
system connected to the output jacks (or
turn the volume all the way down) before
you make connections.
When connecting stereo output devices
such as a synthesizer or CD player, connect
the L output of the external device to INPUT
1 and the R output to INPUT 2.
To power the MRS-8 from
an AC outlet, be sure to use
only the ZOOM AD-0006
(available separately). Using
another AC adapter can
lead to malfunction and
damage.
The INPUT 1 connector accepts a standard phone
plug cable (unbalanced). The INPUT 2 connector
accepts an XLR plug cable (balanced) or a phone
plug cable (balanced or unbalanced).
Rear panel
When a passive electric guitar/bass or other
instrument with high output impedance is
connected to INPUT 1, set the [INPUT 1 SELECT]
switch to GUITAR/BASS.
When an active electric guitar/bass, a dynamic
microphone, synthesizer or other device with low
output impedance is connected to INPUT 1, set
the [INPUT 1 SELECT] switch to MIC/LINE.
Guitar
Bass
Headphones
Loop the cable of the AC adapter around
the hook as shown in the diagram before
connecting it to the [DC 12V] jack. This
will prevent the plug from being pulled out
if the AC adaptor cable is accidentally
pulled.
MIDI interface
Connections
MRS-8(E).book 12 ページ ２００４年７月３０日 金曜日 午後５時２４分