User's Manual

Appendix
ZOOM MRS-8
127
Parameter description
STEP
DEPTH RATE RESONANC
Changes the sound with step-like filter characteristics.
RING MOD
POSITION RATE BALANCE
Produces a metallic sound.
CRY
POSITION RESO SENS
Talking-modulator-like effect.
EXCITER
FREQ DEPTH LowBoost
Gives the sound more focus and spatial definition.
AIR
SIZE TONE MIX
Simulates the air ambience of the room, giving the sound spatial depth.
WIDE
TIME WET LVL DRY LVL
Simulates a stereo recording with two microphones.
DELAY
TIME FB MIX
Delay effect with a delay time of up to 2.9 seconds.
ECHO
TIME FB MIX
Delay effect with warm sound, up to 2.9 second delay time.
FIX-WAH
FLT TYPE POSITION FREQ R MODE R WAVE R SYNC
Changes the wah frequency in sync with rhythm tempo.
ARRM-PIT
TYPE TONE R WAVE R SYNC
Changes the pitch in sync with rhythm tempo.
Parameter Setting range Description
DEPTH
EXCITER: 0 – 30
Adjusts the depth of the effect.
Others: 0 – 10
RATE
TREMOLO: 1 – 30, t0 – t9, M1
Adjusts the speed of the effect. The "tx" or "Mx" setting results in sync with the
rhythm tempo.
FLANGER, PHASER,
AUTO PAN: 1 – 30, t0 – t9, M1 – M4
Others: 1 – 30
MIX
0 – 30 Adjusts the mix amount of the effect.
FB
FLANGER: -10 – 10
Adjusts the amount of feedback.
DELAY, ECHO: 0 – 10
POSITION
AF, bF
Selects the module location from AF; after the 3 BAND EQ module and bF; before
the PRE AMP/DRIVE module.
COLOR
Specifies the type of phase tone.
1 4-stage phaser
2 4-stage phaser with inverted feedback
3 8-stage phaser
4 8-stage phaser with inverted feedback
CLIP
0 – 10 Emphasizes the effect.
WIDTH
0 – 10 Adjusts the width between L/R.
FLT TYPE
bPF, LPF Specifies the filter type.
RESONANC
AUTO WAH, CRY: 1 – 10
Adjusts the effect character intensity.
STEP: 0 – 10
SENS
-10 – -1, 1 – 10 Adjusts the effect sensitivity.
SHIFT
-12.0 – 24.0 Adjust the pitch shift amount. The value “1.0” corresponds to semitone.
TONE
0 – 10 Adjusts the tone.
BALANCE
0 – 30 Adjusts the balance between the direct sound and effect sound.
TIME
SLOW-ATK: 1 – 30 Adjusts the attack speed.
WIDE: 1 – 64
Adjusts the delay time in 1-ms steps. The "tx" or "M1" setting results in sync with
the rhythm tempo.
DELAY, ECHO: 1 - 2900, t1 - t9, M1
CURVE
0 – 10 Adjusts the attack curve.
FREQ
EXCITER: 1 – 5 Adjusts the frequency.
FIX-WAH: 1 – 50 Adjusts wah effect center frequency.
LowBoost
0 – 10 Emphasizes the low frequency range.
SIZE
1 – 10 Adjusts the spatial width.
WET LVL
0 – 30 Adjusts the mix amount of the effect sound.
DRY LVL
0 – 30 Adjusts the mix amount of the direct sound.
LEVEL
1 - 8 Adjusts the module output level.
MRS-8(E).book 127 ページ ２００４年７月３０日 金曜日 午後５時２４分