User's Manual

Appendix
ZOOM MRS-8
133
DIMENSION/RESONANCE module
Parameter description
ZNR module
See the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.
CHORUS/DELAY module
Parameter description
Type Parameter
DIMENSN
RISE 1 RISE 2
Produces spatial width.
RESONNC
DEPTH FreqOFST RATE TYPE RESONANC EFX LVL DRY LVL
A resonance filter with LFO.
Parameter Setting range Description
RISE 1
0 – 30 Adjusts the emphasizing degree of the stereo component.
RISE 2
0 – 30 Adjusts the spaciousness that includes the monaural component.
DEPTH
0 – 10 Adjusts the depth of the effect.
FreqOFST
1 – 30 Adjusts the LFO offset.
RATE
1 – 30, t0 – t9, M1 – M4
Adjusts the speed of the effect. The "tx" or "Mx" setting results in sync with the
rhythm tempo.
TYPE
HPF, LPF, bPF Specifies the filter type.
RESONANC
1 – 30 Adjusts the effect character intensity.
EFX LVL
0 – 30 Adjusts the mix amount of the effect sound.
DRY LVL
0 – 30 Adjusts the mix amount of the direct sound.
Send/return Effect
Type Parameter
CHORUS
LFO TYPE DEPTH RATE PRE DLY EFX LVL
Adds pulsation and spaciousness to the sound.
DELAY
TIME FB DAMP PAN EFX LVL
Delay effect with a delay time of up to 2.9 seconds.
HALL
PRE DLY DECAY EQ HIGH EQ LOW E/R MIX EFX LVL
Simulates the acoustics of a concert hall.
ROOM
PRE DLY DECAY EQ HIGH EQ LOW E/R MIX EFX LVL
Simulates the acoustics of a room.
SPRING
PRE DLY DECAY EQ HIGH EQ LOW EFX LVL
Simulates a spring type reverb machine.
PLATE
PRE DLY DECAY EQ HIGH EQ LOW EFX LVL
Simulates a plate reverb.
Parameter Setting range Description
LFO TYPE
Mn, St Selects the LFO phase: Mn (mono) or St (stereo).
DEPTH
0 – 10 Adjusts the depth of the effect.
RATE
1 – 30 Adjusts the speed of the effect.
PRE DLY
CHORUS: 1 - 30
Adjusts the pre-delay time.
HALL, ROOM, SPRING, PLATE: 1 – 100
EFX LVL
0 – 30 Adjusts the mix amount of the effect sound.
TIME
1 - 2900, t1 – t9, M1
Adjusts the delay time in 1-ms steps. The "tx" or "M1" setting results in sync with
the rhythm tempo.
FB
0 – 10 Adjusts the amount of feedback.
DAMP
0 – 10 Adjusts the cut amount of the delay sound's high range.
PAN
L10 – L1, 0, r1 – r10 Adjusts the stereo position of the delay sound.
DECAY
1 – 30 Adjusts the reverb time.
EQ HIGH
-12 – 6 Adjusts the high range level of the effect sound.
EQ LOW
-12 – 6 Adjusts the low range level of the effect sound.
E/R MIX
0 – 30 Adjusts the volume of early reflections.
MRS-8(E).book 133 ページ ２００４年７月３０日 金曜日 午後５時２４分