User's Manual

ZOOM MRS-8
14
Power On/Off
To turn the MRS-8 on and off, follow the steps described below.
Power-on
1.
Make sure that the MRS-8 and peripheral
equipment is turned off.
Turn down the volume controls of connected equipment,
the MRS-8, and the monitor system.
2.
Insert an SD card into the card slot.
3.
Set the [POWER ON/OFF] switch of the
MRS-8 to ON.
Data loading for the inserted SD card starts. During this
interval, the [SD CARD ACCESS] indicator lights up.
After a while, the following screen appears.
This is called the main screen. From this screen, you can
access various recording and playback functions.
HINT
To return to the main screen from other screens, press the
[EXIT] key repeatedly.
If an SD card that is not ready for use in the MRS-8 is
inserted, the indication “FORMAT?” appears when you
turn the MRS-8 on. If you press the [ENTER] key at this
point, the SD card will be formatted. When formatting is
complete, the main screen appears.
HINT
•You can also format an SD card after the MRS-8 has started
up, as described on page 118.
• Changing the SD card while the MRS-8 is operating is
possible by following the procedure described on page 117.
4.
Turn on the connected instrument and the
monitor system in that order.
Power-off
1.
Turn down the volume at the monitor
system.
2.
Turn off the monitor system and the
connected instrument in that order.
3.
Set the [POWER ON/OFF] switch of the
MRS-8 to OFF.
The indication “GoodBye See You!” appears on the
display and the unit is turned off. Any settings and other
information are stored automatically on the SD card.
• Never turn power on or off by connecting or
disconnecting the AC adapter. Otherwise data
may be destroyed.
• In particular, if you disconnect the AC adapter
while the [SD CARD ACCESS] indicator is lit,
all data may be permanently destroyed.
PRJ 000
PRJ 000
MRS-8 SD
MRS-8 SD
1-00 0 1-0
MRS-8(E).book 14 ページ ２００４年７月３０日 金曜日 午後５時２４分