User's Manual

Quick Tour
ZOOM MRS-8
19
In the default condition of a project, the sound the bass
program (bass track) is muted. Therefore only the drum
kit (drum track) is heard when the rhythm pattern plays.
HINT
During rhythm pattern play, the pads corresponding to the
currently produced sound of the drum kit (or pitch of the bass
program) are flashing. You can also tap the pads to play the
drum sounds/bass notes.
4.
To change the tempo, press the [TEMPO]
key in the rhythm section and then turn the
dial to change the tempo value shown on
the display.
The tempo value can be set in 0.1 BPM steps. When the
setting is complete, press the [EXIT] key to return to the
previous screen.
HINT
You can also set the tempo by hitting the [TEMPO] key
repeatedly.
5.
To adjust the volume of the drum/bass
track, use the [DRUM/BASS] key in the
rhythm section to select the sound (drum or
bass), and then operate the [RHYTHM]
fader.
The [RHYTHM] fader serves for controlling either the
drum track or the bass track. When the key is lit, the drum
track is selected. When the key is out, the bass track is
selected. The [RHYTHM] fader then controls the
respective level.
• When drum track is selected
• When bass track is selected
The signal level of the respective channel can be checked
with the level meter in the lower part of the display.
In the same way, the [DRUM/BASS] key can be used to
select the sound (drum or bass), and then the [RHYTHM]
status key can be used to control muting on/off for the
drum track/bass track.
6.
To stop playback, press the STOP [
P
]key in
the transport section.
7.
To return to the main screen, press the
[EXIT] key.
TEMPO
TEMPO
BPM=
BPM=
1200
Tempo value
Lit
Out
Bass track signal level
Drum track signal level
MRS-8(E).book 19 ページ ２００４年７月３０日 金曜日 午後５時２４分