User's Manual

Quick Tour
ZOOM MRS-8
27
The parameters that can be selected for tracks 1 – 8 and
for drum/bass track are listed in the table below.
■ Track parameter list
Parameter
Display Setting range Description
EQ HI GAIN
EQ HI G
-12 – +12dB Adjusts high frequency EQ boost/cut.
EQ HI FREQUENCY
EQ HI F
500 – 18000(Hz) Selects turnover frequency for high frequency EQ.
EQ LOW GAIN
EQ LO G
-12 – +12dB Adjusts low frequency EQ boost/cut.
EQ LOW FREQUENCY
EQ LO F
40 – 1600(Hz) Selects turnover frequency for low frequency EQ.
EFX SEND LEVEL
EFX SEND
0 – 100 Adjusts signal level sent to send/return effect.
PAN
PAN
L100 – 0 – R100
Adjusts panning (left/right positioning) for the track. For tracks 5/6,
7/8, and the drum track, this adjusts the left/right balance.
V-TAKE
(tracks 1 – 8 only)
TR x-y
x=1 – 8, y=1 – 10
Selects the V-take to use for the track (
→
p. 32). x is the track number
and y is the V-take number.
FADER
FADER
0 – 127 Adjusts the fader setting.
STEREO LINK
(tracks 1 – 4 only)
ST LINK
ON/OFF Links the parameters for tracks 1/2 or 3/4 (
→
p. 60).
6.
Turn the dial to select the setting value.
HINT
By pressing the [ENTER] key while an EQ parameter or the
EFX SEND LEVEL parameter is displayed, you can switch
that parameter (EQ HI, EQ LO, effect send) on and off.
7.
Repeat steps 4 – 6 to adjust other
parameters.
By using the cursor left/right keys or the status keys to
select other tracks, you can adjust the parameters for
these tracks.
8.
To return to the main screen, press the
[EXIT] key.
HINT
Some track parameters (EQ, panning etc.) can also be used
for the drum/bass track and input signals.
The track signals sent to the internal mixer can be
individually processed by an effect that is connected
internally to the send/return loop of the mixer. (This is
called the send/return effect.)
The intensity of the send/return effect can be adjusted for
each track by using the send level parameter (which
controls the signal level that is sent to the effect).
Increasing this parameter will result in stronger effect
action.
This section describes how to adjust the send level for
each track.
4.2 Applying the send/return
effect
7/821 BASSDRUM
MASTER
SEND LEVEL
Send
Return
Send/return
effect
MRS-8(E).book 27 ページ ２００４年７月３０日 金曜日 午後５時２４分