User's Manual

Quick Tour
ZOOM MRS-8
28
■ Selecting the send/return effect patch
1.
From the main screen, press the [SEND/
RETURN] key in the effect section.
The display changes as follows. From this screen, you
can select the send/return effect patch.
2.
Turn the dial to select the patch.
The send/return effect has 60 patches (of which 40 are
preprogrammed).
HINT
In the default condition of a project, the send level for the
send/return effect is set to zero for each track. Therefore you
need to raise the setting to verify the sound produced by the
effect.
3.
To return to the main screen, press the
[EXIT] key.
■ Adjusting the send/return effect intensity
4.
From the main screen, press the [TRACK
PARAMETER] key in the display section,
and then use the cursor left/right keys or
the status keys to select the track for which
you want to adjust the send level.
5.
Use the cursor up/down keys to bring up
the indication “EFX SEND” onto the second
line of the display.
In this condition, you can adjust the send level for the
track.
6.
While playing the song, turn the dial to
adjust the send level value for the track.
7.
Adjust the send level for other tracks in the
same way.
8.
To return to the main screen, press the
[EXIT] key.
HINT
If no recording track is selected, you can apply the insert
effect to the input signal.
You can apply the insert effect to the output of any track
(audio track or drum/bass track), so that it post-processes
the output signal of the track.
1.
From the main screen, press the [INPUT
SRC] key in the effect section.
The currently selected insert location appears on the
display.
2.
Use the status keys or turn the dial to bring
up the track to which you want to apply the
insert effect on the second line of the
display.
The status key of the selected track lights up.
HINT
If required, you can use the effect on two mono tracks. To do
this, press the status keys for an odd-numbered and even-
numbered track together, or turn the dial to select a mono
track x 2 as insert target (TR 1/2, TR 3/4).
3.
Press the [INSERT EFFECT] key in the
effect section.
The screen for selecting the insert effect algorithm/patch
appears.
SEND
SEND
VoChorus
VoChorus
0
Patch name Patch number
TR4
TR4
EFX SEND
EFX SEND
0
Send level value
4.3 Applying the insert effect
to a track
IN SRC
IN SRC
IN
IN
IN SRC
IN SRC
TR1
TR1
MRS-8(E).book 28 ページ ２００４年７月３０日 金曜日 午後５時２４分