User's Manual

Reference [Recorder]
ZOOM MRS-8
33
• BAS x-yy
V-take recorded through BASS algorithm of insert effect
• MIC x-yy
V-take recorded through MIC algorithm of insert effect
• LIN x-yy
V-take recorded through LINE algorithm of insert effect
• DUL x-yy
V-take recorded through DUAL MIC algorithm of insert
effect
• MAS x-yy
V-take recorded through MASTERING algorithm of
insert effect
• BYP x-yy
V-take recorded without passing through insert effect
• BOU x-yy
V-take recorded using the bounce function or rhythm
recording function
You can change the assigned name of a V-take as follows.
1.
From the main screen, press the [TRACK
PARAMETER] key in the display section.
2.
Use the cursor up/down keys to bring up
the indication “TR x-yy” on the display
(where x is the track number and yy is the
V-take number).
3.
Use the cursor left/right keys or the status
keys to select the track for which to change
the V-take name.
NOTE
If you select a V-take on which nothing is recorded, the
indication “NO DATA” appears and the name cannot be
edited.
4.
Press the [EDIT] key.
The cursor (flashing box) appears on the first character of
the V-take name. This indicates that you can change the
V-take name.
5.
Use the cursor left/right keys to move the
cursor to the character to change, and use
the dial or the pads and keys in the rhythm
section to select the character.
During character input, you can use the cursor left/right
keys to move the input position. Characters can be input
either by turning the dial or pressing the pads and keys of
the rhythm section, as described below.
• Deleting a character
Move the cursor to the character to delete, and press the
[EDIT] key. The character is deleted and subsequent
characters move one position to the left.
• Entering a character with the dial
The dial changes the character under the cursor. Turn the
dial until the desired character is shown. The following
characters can be selected.
Numerals:
0 – 9
Letters:
A – Z, a – z
Symbols:
(space) ! “ # $ % & ‘ ( )
*
+ , – . / : ; < >
= ? @ [ ] ^ _ ` { } \ ˜
• Entering a character with the rhythm section
pads and keys
Move the cursor to the input position and repeatedly press
the respective pad or key to enter a numeral, letter, or
symbol. The pad/key assignments are shown below.
When you press a pad or key, the character is inserted and
TR 1- 1
TR 1- 1
GTR 1- 1
GTR 1- 1
Cursor
TakeName
TakeName
±TR 2- 1
TR 2- 1
[SONG/PATTERN] key
Symbol: x +
[TEMPO] key
Symbol: ( )
Pad 9
Symbol: !?@&
Numeral: 9
Pad 6
Letter:
PQRS pqrs
Numeral: 6
Pad 5
Letter:
MNO mno
Numeral: 5
Pad 3
Letter: GHI ghi
Numeral: 3
Pad 1
Letter: ABC abc
Numeral: 1
Pad 4
Letter:
JKL jkl
Numeral: 4
Pad 7
Letter:
TUV tuv
Numeral: 7
Pad 8
Letter:
WXYZ wxyz
Numeral: 8
Pad 2
Letter: DEF def
Numeral: 2
[DRUM/BASS] key
Numeral: 0
MRS-8(E).book 33 ページ ２００４年７月３０日 金曜日 午後５時２４分