User's Manual

Reference [Recorder]
ZOOM MRS-8
36
This section explains how to select a mark and move to
its position. This can be done in two ways: you can use
dedicated keys to jump to marks in the vicinity, or you
can specify the mark number directly.
■ Locating the next or previous mark
1.
From the main screen, press either the
MARKER [
U
] or [
I
] key in the control
section.
Each time you press the key, the unit jumps to the next
mark before or after the current location.
■ Specifying the mark number to locate
1.
From the main screen, use the cursor left/
right keys to cause the mark number to
flash.
In this condition, the mark number can be changed.
2.
Turn the dial to select the desired mark
number.
As soon as the number is changed, the recorder jumps to
that number.
Here’s how to delete a mark that you assigned.
1.
Locate the mark to delete.
The mark whose number is shown in the MARKER field
can be deleted. A mark can only be deleted when it
exactly matches the current location. Make sure that the
mark icon is shown. If not, use the MARKER [
U
] / [
I
]
keys to jump to the exact marker point.
2.
Press the [MARK/CLEAR] key in the control
section.
The selected mark will be deleted, and subsequent marks
will be renumbered.
HINT
• It is not possible to delete the mark (number 00) located at the
beginning of the song.
•A deleted mark cannot be recovered.
Playing back the same
passage repeatedly (A-B
repeat function)
A-B repeat is a function that automatically plays only a
specified section of a song. This is useful to listen to the
same passage repeatedly.
1.
Move to the point where repeat playback
should start, and press the [A-B REPEAT]
key in the control section.
The key flashes, and the repeat start location (point A) is
set.
HINT
The A/B point can be specified either during playback or
when the MRS-8 is stopped.
2.
Move to the point where repeat playback
should end, and press the [A-B REPEAT]
key once more.
The [A-B REPEAT] key changes from flashing to
constantly lit, and the repeat end location (point B) is set.
NOTE
If you specify a point B that is located earlier than point A, the
region from points B
→
A will be played repeatedly.
3.
To redo the A/B point setting, press the [A-
B REPEAT] key so that it goes out, and then
repeat the procedure from step 1.
4.
To begin repeat playback, press the PLAY
[
R
] key.
When point B is reached, the recorder jumps to point A,
and playback resumes.
Locating a mark
Deleting a mark
Current location
Mark
Song
H
H
0
06- 2- 8
01
Mark number flashes
MRS-8(E).book 36 ページ ２００４年７月３０日 金曜日 午後５時２４分