User's Manual

Reference [Recorder]
ZOOM MRS-8
43
6.
When play is complete, press the STOP [
P
]
key.
7.
Press the [BOUNCE] key.
The key goes out, and bounce recording is canceled. To
return to the normal condition, switch the recording
source back to “MASTER”, as described in “Selecting
the recording source”.
Making settings for pre-
count operation
In the default condition of a project, a pre-count of four
beats is heard before the start of recording. The number
of beats and the pre-count volume can be changed as
follows.
1.
From the main screen, press the [SYSTEM/
UTILITY] key in the display section.
2.
Use the cursor left/right keys to bring up
the indication “SYSTEM PreCount” on the
display, and press the [ENTER] key.
The display changes as follows.
3.
To change the number of pre-count beats,
press the [ENTER] key.
The current setting is shown. Turn the dial to make the
selection from the following choices.
• OFF
The pre-count is turned off.
•1 – 8
A pre-count of 1 – 8 beats is heard.
• SPECIAL
A special pre-count as follows is heard.
When the setting is complete, press the [EXIT] key to
return to the screen of step 2.
4.
To change the volume of the pre-count
sound, use the cursor left/right keys to
bring up the indication “PreCount
VOLUME” on the display, and press the
[ENTER] key.
The display changes as follows. Turn the dial to set the
volume (0 – 15).
5.
When the setting is complete, press the
[EXIT] key repeatedly to return to the main
screen.
When you initiate a recording, the selected number of
pre-count beats will be heard at the selected volume.
SYSTEM
SYSTEM
PROJECT
PROJECT
PreCount
PreCount
COUNT
COUNT
Number of pre-count beats
COUNT
COUNT
4
VOLUME
VOLUME
10
10
Pre-count volume
MRS-8(E).book 43 ページ ２００４年７月３０日 金曜日 午後５時２４分