User's Manual
Reference [Track Editing]
ZOOM MRS-8
46
The display changes as follows. From this screen, you
can specify the copy destination start point.
7.
Specify the copy destination start point in
the same way as in step 2, and press the
[ENTER] key.
The indication “Copy SURE?” appears on the display.
8.
To carry out the copy operation, press the
[ENTER] key.
When the copy operation is completed, the unit returns to
the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
You can move the audio data of a specified range to a
specified position on a specified track/V-take. This action
will overwrite the existing data at the destination
location. The move source data will be erased.
1.
Refer to steps 1 – 6 of “Basic steps for
range editing” to select the move source
track/V-take, and press the [ENTER] key.
The display changes as follows. In this condition, you can
specify the move start point.
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the move start point.
The point can be specified in minutes/seconds/
milliseconds, or in measures/beats/ticks.
HINT
If you specify a point where no audio data exist, the second
line of the display shows *.
3.
Press the [ENTER] key.
The display changes to “Move Src END”. This screen lets
you specify the move range end point.
4.
Specify the move end point in the same way
as described in step 2.
If you press the PLAY [
R
] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
The display now shows “Move Dst TR x-yy” (where x is
the track number and yy the V-take number). From this
screen, you can specify the move destination track/V-
take.
HINT
You can select the same track as move source and move
destination.
6.
Select the move destination track/V-take in
the same way as for the move source, and
press the [ENTER] key.
The display changes as follows. From this screen, you
can specify the move destination start point.
Moving a specified range of
data
Copy Dst
Copy Dst
TO
TO
75- 3 15 0 4- 0
00
Move source track
Move destination track
Move
Move Src
Move Src
START
START
1- 0 0 0 1- 0
00
Move Src
Move Src
END
END
103- 4 28 0 3-44
00
Move Dst
Move Dst
TR 1- 1
TR 1- 1
Move Dst
Move Dst
TO
TO
103- 4 28 0 3-44
00
MRS-8(E).book 46 ページ ２００４年７月３０日 金曜日 午後５時２４分