User's Manual
Reference [Track Editing]
ZOOM MRS-8
48
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the start point.
The point can be specified in minutes/seconds/
milliseconds, or in measures/beats/ticks.
HINT
If you specify a point where no audio data exist, the second
line of the display shows *.
3.
Press the [ENTER] key.
The display changes to “Trim Src END”. This screen lets
you specify the end point of the range that you want to
keep.
4.
Specify the end point in the same way as
described in step 2.
If you press the PLAY [
R
] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
The indication “Trim SURE?” appears on the display.
6.
To carry out the trimming operation, press
the [ENTER] key.
When the trimming operation is completed, the unit
returns to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
You can fade in or fade out the audio data over a specified
range.
1.
Refer to steps 1 – 6 of “Basic steps for
range editing” to select the track for fade-
in or fade-out, and press the [ENTER] key.
The display changes as follows. In this condition, you can
specify the fade-in/out start point.
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the fade-in/out start point.
The point can be specified in minutes/seconds/
milliseconds, or in measures/beats/ticks.
HINT
If you specify a point where no audio data exist, the second
line of the display shows *.
3.
Press the [ENTER] key.
The display changes to “Fade Src END”. This screen lets
you specify the fade-in/out end point.
4.
Specify the fade-in/out end point in the
same way as described in step 2.
If you press the PLAY [
R
] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
The display changes as follows.
6.
Turn the dial to select the fade-in or fade-
out curve.
Curves I-1 to I-3 are for fade-in, and curves o-1 to o-3 are
for fade-out. The different kinds of curves look as
follows.
Fade-in/fade-out of specified
data range
Trim Src
Trim Src
END
END
96- 4 10 0 4-16
00
Fade-in
Fade Src
Fade Src
START
START
1- 0 0 0 1- 0
00
Fade Src
Fade Src
END
END
4- 0 10 0 4-17
00
Fade Src
Fade Src
CURVE
CURVE
1-1
Volume change curve
MRS-8(E).book 48 ページ ２００４年７月３０日 金曜日 午後５時２４分