User's Manual

Reference [Track Editing]
ZOOM MRS-8
49
7.
Press the [ENTER] key.
The indication “Fade SURE?” appears on the display.
8.
To carry out the fade-in/fade-out operation,
press the [ENTER] key once more.
When the fade-in/fade-out operation is completed, the
unit returns to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
You can reverse the order of a specified range of audio
data.
1.
Refer to steps 1 – 6 of “Basic steps for
range editing” to select the track/V-take for
reversing, and press the [ENTER] key.
The display changes as follows. In this condition, you can
specify the reverse start point.
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the reverse start point.
The point can be specified in minutes/seconds/
milliseconds, or in measures/beats/ticks.
HINT
If you specify a point where no audio data exist, the second
line of the display shows *.
3.
Press the [ENTER] key.
The display changes to “Rvrs Src END”. This screen lets
you specify the reverse end point.
4.
Specify the reverse end point in the same
way as described in step 2.
If you press the PLAY [
R
] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
The indication “Reverse SURE?” appears on the display.
6.
To carry out the reversing operation, press
the [ENTER] key.
When the reverse operation is completed, the unit returns
to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Reversing a specified range of
audio data
I-1 I-2 I-3
o-1 o-2 o-3
Fade-in
Fade-out
A B C D E E D C B A
Reverse
Rvrs Src
Rvrs Src
START
START
1- 0 0 0 1- 0
00
Rvrs Src
Rvrs Src
END
END
42- 1 18 0 2- 0
00
MRS-8(E).book 49 ページ ２００４年７月３０日 金曜日 午後５時２４分