User's Manual

Reference [Track Editing]
ZOOM MRS-8
53
3.
Use the cursor left/right keys and the dial to
select the track/V-take to import, and press
the [ENTER] key.
When an unrecorded track/V-take is selected, the
indication “NO DATA” is shown instead of the V-take
name.
4.
Press the [ENTER] key.
The indication “IMPORT SURE?” appears on the
display. If audio data exist at the import destination, the
indication “OverWrt?” is shown. When the import
operation is performed, these data will be overwritten.
5.
To carry out the import operation, press the
[ENTER] key once more.
When the import operation is completed, the unit returns
to the V-take selection menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Track capture and swap
You can capture the audio data of any track and
temporarily store them. Later you can swap the captured
data with the current data of the track. This lets you save
the state of a track before an editing operation. If the
result of the operation is not as desired, you can then
easily restore the track to its previous state.
Capture/swap is performed on a track basis. If required,
you can capture all audio tracks.
Captured audio data will be retained on the SD card until
another project is loaded or the power is turned off.
You can capture the audio data of any specified track.
1.
From the main screen, press the [SYSTEM/
UTILITY] key in the display section.
The indication “SYSTEM PROJECT” appears on the
display.
TR 6- 1
TR 6- 1
T06-LdVo
T06-LdVo
2
Track/V-take number
V
-take name
Capturing a track
Recorder
Recorded data
Rerecorded data
Track 1
Track 2
Track 3
Captured
data of
track 1
Captured
data of
track 1
Captured
data of
track 1
Capture
Recorder
Track 1
Track 2
Track 3
Swap
Recorder
Track 1
Track 2
Track 3
Capture operation for track 1
Swap operation for track 1
MRS-8(E).book 53 ページ ２００４年７月３０日 金曜日 午後５時２４分