User's Manual

Reference [Mixer]
ZOOM MRS-8
57
• Selecting the built-in mic and INPUT 2
Press the [MIC] key so that the key is lit. Then hold the
INPUT [ON/OFF] 1 key and press the INPUT [ON/OFF]
2 key so that both keys are lit.
3.
While playing your instrument, adjust the
[INPUT] control for the input(s) selected in
step 2, to adjust the input sensitivity.
The sensitivity of the built-in mic can be adjusted using
[INPUT] control 1. Make adjustments so that the [PEAK]
indicator flickers slightly when you play your instrument
at its loudest volume.
4.
To record the sound through the insert
effect, press the [INPUT SRC] key in the
effect section and turn the dial to set the
insert position for the effect to IN.
The insert effect will be applied to the input source. To
record without the insert effect, press the [INSERT
EFFECT] key in the effect section repeatedly until the
key is out. (While the key is out, the insert effect will be
bypassed.)
When the setting is complete, press the [EXIT] key to
return to the main screen.
HINT
In the default condition of a project, the insert effect is
inserted into the input, and a patch suitable for guitar/bass
recording is selected.
5.
To select the patch for the insert effect,
press the [INSERT EFFECT] key in the
effect section.
The display changes as follows. In this condition, the
cursor up/down keys select the insert effect algorithm,
and the dial selects the effect patch for the algorithm.
6.
Use the cursor up/down keys and the dial
to select the effect patch, and press the
[EXIT] key.
The main screen returns.
The level of the signal sent to the recording track(s)
changes according to the insert effect setting. After
switching a patch or changing an effect setting, you
should readjust the recording level as described in steps 7
– 9.
7.
From the main screen, press the [TRACK
PARAMETER] key in the display section,
and then press the INPUT [ON/OFF] key 1
or 2.
The indication “INPUT” appears on the first line of the
display. This indicates that the track parameters for the
input signal are being called up.
8.
Press the cursor down key repeatedly, until
“REC LVL” is shown on the second line of
the display.
The input signal recording level can now be adjusted.
9.
While playing your instrument at its loudest
volume, turn the dial to adjust the recording
level.
The REC LVL parameter determines the level of the
signal sent to the recording track via the insert effect. The
level after adjustment can be checked on the level meter.
At the highest volume, the 0 (dB) segment of the level
meter should flicker slightly.
[MIC]キー
INPUT
[ON/OFF]
key
INPUT
[ON/OFF]
key
CLEAN
CLEAN
Standard
Standard
0
INPUT
INPUT
EFX SEND
EFX SEND
0
INPUT
INPUT
REC LVL
REC LVL
100
MRS-8(E).book 57 ページ ２００４年７月３０日 金曜日 午後５時２４分