User's Manual

Reference [Mixer]
ZOOM MRS-8
58
After setting the recording level, press the [EXIT] key to
return to the main screen.
HINT
When the insert effect is bypassed for recording, setting the
REC LVL parameter to 100 results in unity gain (recording
level same as input level).
10.
Press the status key for the track to be
used for recording until the key is lit in red.
The signal of the selected input source will be sent to the
track(s). Up to two mono tracks or one stereo track can be
selected.
When selecting two mono tracks, only odd/even-
numbered pairs can be selected (tracks 1/2 or 3/4). To
select two tracks, repeatedly press the status key for one
track until the key is lit in red, and then hold the key while
pressing the status key for the other track so that it is also
lit in red.
The signal flow will change as follows, depending on the
destination track selection.
• One mono track selected
• Stereo track or two mono tracks selected
• Recording destination not selected
HINT
You can link two mono tracks and use them as a stereo track
(
→
p. 60). In this case, the track parameter PAN functions as
a BALANCE parameter that adjusts the left/right level
balance.
Input 2 recording level
Input 1 recording level
0 (dB) segment
One Input source
Recorder
Track
INPUT 1 (built-in mic)
or
INPUT 2
Two Input sources
Recorder
Track
INPUT 1 (built-in mic)
INPUT 2
Recorder
INPUT 1 (built-in mic)
or
INPUT 2
Recorder
INPUT 1 (built-in mic)
INPUT 2
Odd-numbered track
Even-numbered track
Odd-numbered track
Even-numbered track
One Input source
Two Input sources
MASTER
OUTPUT
MASTER
OUTPUT
PAN
PAN
MASTER
MASTER
INPUT 1 (built-in mic)
or
INPUT 2
INPUT 1 (built-in mic)
INPUT 2
Tracks 1 - 8
Drum/bass track
Tracks 1 - 8
Drum/bass track
One Input source
Two Input sources
MRS-8(E).book 58 ページ ２００４年７月３０日 金曜日 午後５時２４分