User's Manual

Reference [Mixer]
ZOOM MRS-8
59
Adjusting the signal for
each track (track
parameters)
The mixer of the MRS-8 lets you adjust various aspects
for each track (called track parameters), such as level,
panning, EQ, and send/return effect intensity.
NOTE
The audio tracks 5/6 and 7/8 and the drum track are stereo
tracks. Except for the V-take selection (audio tracks only),
the track parameters for these tracks are the same for left
and right.
1.
From the main screen, press the [TRACK
PARAMETER] key in the display section.
2.
Use the cursor left/right keys or the status
keys to select the track/input to be set.
HINT
• When selecting the V-take of stereo tracks (5/6, 7/8), the track
is toggled between odd-numbered track and even-numbered
track with each push of the key.
• When selecting the drum track/bass track with the [RHYTHM]
status key, each push of the key toggles the track. The track
operated with pads or faders is also switched.
3.
Use the cursor up/down keys to select the
track parameter to adjust.
The selectable parameters for the respective tracks and
inputs are listed below.
TR 3
TR 3
EQ HI G
EQ HI G
0
■ Track parameter list
(*)
: denotes a parameter that can be switched on and off by pressing the [ENTER] key.
O : Valid parameter for this track/input
Parameter
Display
Setting
range
Description
Track
1 - 4
Track
5 - 8
Master
track
Drum/
bass
track
Input
EQ HI GAIN (*)
EQ HI G
-12 – +12dB
Adjusts high-frequency boost or
cut in the range from -12 to +12
dB. This parameter is only shown
when HI EQ is on.
OO --- O ---
EQ HI
FREQUENCY
(*)
EQ HI F
500 – 18000
(Hz)
Adjusts turnover frequency for
high-frequency boost/cut. This
parameter is only shown when HI
EQ is on.
OO --- O ---
EQ LOW
GAIN (*)
EQ LO G
-12 – +12dB
Adjusts low-frequency boost or
cut in the range from -12 to +12
dB. This parameter is only shown
when LOW EQ is on.
OO --- O ---
EQ LOW
FREQUENCY
(*)
EQ LO F
40 – 1600 (Hz)
Adjusts turnover frequency for
low-frequency boost/cut. This
parameter is only shown when
LOW EQ is on.
OO --- O ---
EFX SEND
LEVEL (*)
EFX SEND
0 – 100
Adjusts the level of the signal sent
to the send/return effect.
OO --- O O
PAN
PAN
L100 – 0
–R100
Adjusts the panning value (left/
right position) of the track/input
signal. For stereo tracks, the
parameter adjusts the left/right
level balance.
OO --- O O
V-TAKE
TR x-y
x=1 – 8,
y=1 – 10
Selects the V-take to use for the
track (
→ p. 32). x stands for the
track number and y for the V-take
number.
OO O --- ---
FADER
FADER
0 – 127 Adjusts the fader setting. O O O O ---
REC LVL
REC LVL
0 – 127 Adjusts the recording level. --- --- --- --- O
STEREO
LINK
ST LINK
ON/OFF
Controls the stereo link function
for linking the parameters of mono
tracks 1/2 or 3/4 (
→ p. 60).
O --- --- --- ---
all.fm 59 ページ ２００４年７月３０日 金曜日 午後６時５１分