User's Manual

Reference [Rhythm]
ZOOM MRS-8
82
HINT
During chord information input, you can press the PLAY [R ]
key to check the rhythm pattern. The pattern will be played
with the new chord setting applied. To stop play, press the
STOP [
P ] key.
5.
To change the chord type, press the cursor
down key once to bring up the indication
“CHORD” on the first line of the display.
You can now input the chord type.
6.
Turn the dial to select the chord type from
the following options.
7.
Move to the location where you want to
input the next chord information, and input
chord information in the same way as
described in steps 3 – 6.
You can move the input location during rhythm song step
input in the following ways.
• Moving in steps of a measure
Use the cursor left/right keys to move to the beginning of
the preceding or following measure.
• Moving in steps of a beat
Use the REW [
T
]/FF [
Y
] keys to move to the beginning
of the preceding or following beat.
• Moving in steps of a sixteenth note
Repeatedly press the cursor up key to bring up the
indication “EV
→
” on the display, and turn the dial to
move forward or backward in 12-tick (16th note) units.
If necessary, you can also input chord information at a
point within a measure, as shown below (smallest unit:
sixteenth note). To do this, bring up the indication
“EV
→
” on the first line of the display, turn the dial to
move current point, and then bring up the chord
information input screen again.
HINT
At a point where no chord information is input, “
←
” is shown
to the left of the “ROOT” or “CHORD” indication. This means
that the immediately preceding information continues to be
valid.
8.
Input the remaining chord information in
the same way.
If you have made a mistake or want to make a change,
proceed as follows.
•To change chord information
Move to the location at which the chord information is
input, use the cursor up/down keys to switch the display
to “ROOT” or “CHORD”, and turn the dial to change the
chord information.
•To delete chord information
Move to the location at which the chord information is
input, and use the cursor up/down keys to show the chord
information to delete. Press the [FUNCTION] key twice.
(The indication “EV ERASE SURE?” appears.) When
you press the [ENTER] key, the chord information will be
deleted, and the display changes to “
←
ROOT” or “
←
CHORD”.
9.
When you have finished, press the STOP
[
P
] key.
The unit returns to the rhythm song selection screen. By
pressing the PLAY [
R
] key in this condition, you can
check the rhythm song with the new chord information.
To return to the main screen, press the [EXIT] key.
ROOT
ROOT
A --
A --
1- 1- 0
CHORD
CHORD
A --
A --
Display Description Display Description
No change
12 3 4 1 2 3 4
1
Em
3
Em
2
Am
4
Am
B7
PATTERN A
12 3 4 1 2 3 4
PATTERN B
Measure
Beat
MRS-8(E).book 82 ページ ２００４年７月３０日 金曜日 午後５時２４分