User's Manual

Reference [Rhythm]
ZOOM MRS-8
86
2.
Turn the dial to select the rhythm song to
transpose.
3.
Press the [EDIT] key.
The rhythm song edit menu appears.
4.
Verify that the indication “TRANSPOS” is on
the display, and press the [ENTER] key.
The display changes as follows.
5.
Turn the dial to select the transpose setting
(-6 – 0 +6), and press the [ENTER] key.
The default setting is 0 (no transposing). When you select
a setting such as +5, the bass sequence will be transposed
five semitones (a perfect fourth) up. (Depending on the
range, the result may be one octave higher or lower.)
When you press the [ENTER] key to confirm the
transpose setting, the indication “TRANSPOS SURE?”
appears on the display.
6.
To carry out the transpose operation, press
the [ENTER] key once more.
The transpose operation is carried out, and the rhythm
song edit menu appears again.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
NOTE
When you carry out the transpose operation, the root of the
chord information for the rhythm song is rewritten. To return
to the original condition, perform transpose once more in the
opposite direction.
7.
To return to the main screen, press the
[EXIT] key repeatedly.
You can copy the contents of any rhythm song in a project
to any other rhythm song number. This is useful to create
variations of a song.
NOTE
When you execute the copy, the contents of the destination
rhythm song will be erased. Use this function with care.
1.
From the main screen, press the [SONG/
PATTERN] key repeatedly, until the key is lit.
The rhythm song selection screen appears.
2.
Turn the dial to select the rhythm song to
copy.
This song will be used as copy source.
3.
Press the [FUNCTION] key twice.
The display changes as follows.
4.
Turn the dial to select the number of the
copy destination rhythm song, and press
the [ENTER] key.
When you select an empty rhythm song number, the
indication “E” is shown to the right of the number.
When you press the [ENTER] key, the indication “COPY
SURE?” appears on the display.
5.
To carry out the copy operation, press the
[ENTER] key once more.
When the copy operation is completed, the unit returns to
the rhythm song selection screen with the destination
rhythm song being loaded.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
6.
To return to the main screen, press the
[EXIT] key repeatedly.
SongEdit
SongEdit
TRANSPOS
TRANSPOS
TRANSPOS
TRANSPOS
0
0
Transpose value
Copying a rhythm song
COPY
COPY
0
0
å 1E
1E
Copy destination rhythm song
Copy source rhythm song
MRS-8(E).book 86 ページ ２００４年７月３０日 金曜日 午後５時２４分