User's Manual

Reference [Rhythm]
ZOOM MRS-8
87
This section explains how to erase the entire rhythm song,
resetting it to a blank state.
NOTE
Once you erase the rhythm song, it cannot be recovered.
Use this function with care.
1.
From the main screen, press the [SONG/
PATTERN] key repeatedly, until the key is lit.
The rhythm song selection screen appears.
2.
Turn the dial to select the rhythm song to
erase.
3.
Press the [FUNCTION] key.
The display changes as follows.
4.
To carry out the erase operation, press the
[ENTER] key.
When the erase operation is completed, the unit returns to
the rhythm song selection screen.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
5.
To return to the main screen, press the
[EXIT] key repeatedly.
When a rhythm song is created, the song name “Songxxx”
(where xxx is the song number) is automatically assigned.
You can edit this name as necessary.
1.
From the main screen, press the [SONG/
PATTERN] key repeatedly, until the key is lit.
The rhythm song selection screen appears.
2.
Turn the dial to select the rhythm song
whose name you want to edit.
3.
Press the [EDIT] key.
The rhythm song edit menu appears.
4.
Use the cursor left/right keys to bring up
the indication “SongEdit NAME” on the
display, and press the [ENTER] key.
The display changes as follows.
5.
Use the cursor left/right keys to move the
flashing position to the character to
change, and turn the dial or use the rhythm
section pads and keys to select a
character.
For information on how to input characters, refer to page
33.
6.
When the name has been input, press the
[EXIT] key.
The rhythm song name is changed, and the display
returns to the rhythm song edit menu.
7.
To return to the main screen, press the
[EXIT] key repeatedly.
Erasing the rhythm song
DELETE
DELETE
SURE?
SURE?
Assigning a name to a rhythm
song
SongEdit
SongEdit
TRANSPOS
TRANSPOS
SongName
SongName
SONG000
SONG000
MRS-8(E).book 87 ページ ２００４年７月３０日 金曜日 午後５時２４分