User's Manual

ZOOM MRS-8
91
MASTER 7/85/64321 BASSDRUM
MASTER OUTPUT
Recorder
(1)
Input
Insert effect
Rhythm section
Internal mixer
Drum
Bass
Track 1
Track 2
Track 3
Track 4
Track 5/6
Track 7/8
(2)
(3)
Reference [Effects]
This section explains the functions and operation of the effect section built into the MRS-8.
About the effects
The MRS-8 has two types of effects, an “insert effect”
that is inserted at a specific position, and a “send/return
effect” that is used via the built-in mixer. The two effect
types can be used simultaneously. The characteristics of
these effects are described below.
■ Insert effect
The insert effect is placed into the signal path at a specific
point. You can select one of the following positions at
which to apply the effect.
(1) Immediately after the input jack
(2) In the output of any audio track or drum
track/bass track
(3) Immediately before the [MASTER] fader
When the position immediately after the input jack is
selected, the effect processes the input signal, and the
result will be recorded when you carry out recording.
When the insert effect is applied to one of the audio tracks
(tracks 1 – 8) or the drum track/bass track (drum kit/bass
program output signal), the effect processes only a
specific track. This can be used to modify the sound of a
recorded track.
By selecting the position immediately before the
[MASTER] fader, you can process the final stereo mix,
for example to adjust the tonal quality or sonic intensity
during mixdown or bounce recording.
■ Send/return effect
The send/return effect is internally connected to the send/
return loop of the mixer section. This applies to all tracks
and can be used to add effects such as reverb or chorus
during mixdown or bounce recording.
The signal level of each track going to the send/return
effect (send level) can be adjusted individually. The
output of the send/return effect is returned to the internal
mixer and added to the stereo mix.
MRS-8(E).book 91 ページ ２００４年７月３０日 金曜日 午後５時２４分