User's Manual
Reference [Effects]
ZOOM MRS-8
96
Algorithm Module/display indication
CLEAN
DIST
ACO/BASS SIM
BASS
MIC
DUAL MIC
LINE
MASTERING
COMP PRE AMP/DRIVE EQ
EQ
MODULATION/DELAY
MODULATION/DELAY
MODULATION/DELAY
ZNR, PAT LVL
ZNR, PAT LVL
EQ
ZNR, PAT LVL
EQ
ZNR, PAT LVL
COMP/LIM
COMP/LIM
COMP/LIM
MICPRE+DE-ESSER
MICPRE DOUBLING
ISOLATOR
3BAND COMP/
Lo-Fi
NORMALIZER
DIMENSION/
RESONANCE
EQ
ZNR, PAT LVL
COMPRESS
COMPRESS
COMP/LIM
COMP/LIM
COMP L
COMP L
COMP/LIM
COMP/LIM
CMP/LoFi
CMP/LoFi
PRE/DRV
PRE/DRV
MIC PRE
MIC PRE
MicPre L
MicPre L
ISOLATOR
ISOLATOR
NORMLZR
NORMLZR
3BandEQ
3BandEQ
3BandEQ
3BandEQ
MOD/DLY
MOD/DLY
MOD/DLY
MOD/DLY
MOD/DLY
MOD/DLY
DIM/RESO
DIM/RESO
DOUBLE L
DOUBLE L
TOTAL
TOTAL
TOTAL
TOTAL
EQ L
EQ L
TOTAL
TOTAL
3BandEQ
3BandEQ
TOTAL
TOTAL
3BandEQ
3BandEQ
TOTAL
TOTAL
NOTE
The algorithm itself (type and arrangement of effect modules)
cannot be edited.
1.
From the main screen, press the [INSERT
EFFECT] key in the effect section
repeatedly, until the key is lit.
The insert effect patch selection screen is shown.
2.
Use the cursor up/down keys to select the
algorithm which has the patch you want to
edit. Turn the dial to select the patch.
HINT
If the indication “EMPTY” is shown in the patch name field,
all of the modules are set to off. By editing such a patch, you
can create it from scratch.
3.
Press the [EDIT] key.
The indication “EDIT” appears on the display. This
means that the patch can now be edited.
The first line of the display shows the effect module
currently selected for editing.
4.
Use the cursor left/right keys to select the
effect module to edit.
Depending on the selected effect module, the indication
on the first line of the display changes as shown in the
table below.
This table shows the display that is shown when the effect
module is on. If the effect module is off, the first line of
the display shows the module name or the effect type, and
the second line shows “-OFF-”.
HINT
In the DUAL MIC algorithm, the modules assigned to the L
and R channels can be edited separately. The indication “L”
on the display means that the module for the left channel is
selected. The indication “R” means that the module for the
right channel is selected.
5.
To change the effect type of the currently
selected effect module, turn the dial.
CLEAN
CLEAN
Standard
Standard
0
COMPRESS
COMPRESS
SENS
SENS
4
Effect module
MOD/DLY
MOD/DLY
CHORUS
CHORUS
MRS-8(E).book 96 ページ ２００４年７月３０日 金曜日 午後５時２４分