User's Manual

Reference [Effects]
ZOOM MRS-8
97
For effect modules which comprise multiple effect types,
the name of the currently selected effect type is shown on
the second line of the display. When you turn the dial in
this condition, the effect type changes.
HINT
• If the contents of a patch have been changed, the “EDIT”
indicator in the upper part of the display will change to
“EDITED”. When the setting is returned to the original
condition, the indicator reverts to “EDIT”.
•To edit the ZNR module, bring up the indication “TOTAL” on
the first line of the display, and then press the cursor down key
to call up the parameter.
6.
Use the cursor up/down keys to select the
effect parameter to edit.
The displayed parameter will be different, depending on
the effect module and effect type.
The following illustration shows what appears on the
display when you have selected the DEPTH parameter of
the “FLANGER” effect.
HINT
When the first line of the display shows “TOTAL”, the cursor
up/down keys can be used to select the ZNR module and the
patch level.
7.
Turn the dial to change the setting value.
For details on the effect types that can be selected for each
effect module and on the effect parameters of each type,
refer to the information in the appendix of this manual.
8.
To toggle the effect module on or off, bring
up an effect type or parameter for the
module, and then press the [ENTER] key.
The effect module is turned off. The module name or the
effect type is shown on the first line and the indication
“-OFF-” on the second line of the display. Pressing the
[ENTER] key once more in this condition turns the
module on again.
NOTE
The modules included in TOTAL cannot be turned off.
9.
To compare the sound of the currently
edited patch before and after editing, press
the [INSERT EFFECT] key.
Pressing the [INSERT EFFECT] key during editing
activates the compare function. While the compare
function is active, the display changes as follows and the
patch reverts to the last stored condition.
To return to the edited patch, press the [INSERT
EFFECT] key once more, or press the [EXIT] key.
10.
Repeat steps 4 – 8 as necessary to edit
other modules.
11.
To adjust the patch level (the final volume of
the patch), use the cursor left/right keys to
bring up the indication “TOTAL PAT LVL” on
the display, and turn the dial.
The patch level can be adjusted in the range from 1 to 30.
12.
When you have finished editing, press the
[EXIT] key repeatedly to return to the main
screen.
NOTE
Keep in mind that if you select another patch without first
storing the edited patch, the changes will be lost. For
information on how to store a patch, refer to the next section.
MOD/DLY
MOD/DLY
FLANGER
FLANGER
Effect type name
FLANGER
FLANGER
DEPTH
DEPTH
2
Effect parameter Setting value
FLANGER
FLANGER
-OFF-
-OFF-
COMPARE
COMPARE
Standard
Standard
0
TOTAL
TOTAL
PAT LVL
PAT LVL
23
MRS-8(E).book 97 ページ ２００４年７月３０日 金曜日 午後５時２４分