Specifications

Appendix
106 ZOOM PS-04
SLOW-A
Creates a "violin playing" sound with soft attack.
POSI TIME CURVE
VIBE
Automatic vibrato effect.
DEPTH RATE BAL
STEP
Changes the sound with step-like filter characteristics.
DEPTH RATE RESO
RING
Produces a metallic sound.
POSI RATE BAL
CRY
Talking-modulator-like effect.
POSI RESO SENS
EXCITE
Gives the sound more focus and spatial definition.
FREQ DEPTH LOWBST
AIR
Simulates the air ambience of the room, giving the sound spatial depth.
SIZE TONE MIX
WIDE
Simulates a stereo recording with two mics.
TIME WETLVL DRYLVL
DELAY
Delay effect with a delay time of up to 1 second.
TIME FB MIX
F-WAH
Changes the wah frequency in sync with rhythm tempo.
TYPE FREQ DIRMIX R MODE R WAVE R SYNC
ARRM P
Changes the pitch in sync with rhythm tempo.
TYPE TONE R WAVE R SYNC
Parameter Setting range Description
DEPTH
EXCITE: 0 - 30
Adjusts the depth of the effect.
Other than EXCITE: 0 - 10
RATE
1 - 30 Adjusts the speed of the effect.
MIX
0 - 30 Adjusts the mix amount of the effect.
FB
FLANGE: -10 - 10
Adjusts the amount of feedback.
DELAY: 0 - 9
POSI
AF, bF
Selects the module location from AF; after the EQ module and
bF; before the PRE AMP/DRIVE module.
COLOR
1 - 4 Specifies the type of phase tone.
CLIP
0 - 10 Emphasizes the effect.
TYPE
AUTO WAH, F-WAH: bPF, LPF Specifies the filter type.
ARRM P: Table 3 Selects the pitch change type.
SHIFT
-12 - 24 Sets the pitch shift amount.
TONE
0 - 10 Adjusts the tone.
BAL
0 - 30
Adjusts the balance between the direct sound and effect
sound.
TIME
SLOW-A: 1-30 Adjusts the attack speed.
WIDE: 1 - 64
Adjusts the delay time.
DELAY: 1 - 100
CURVE
0 - 10 Adjusts the attack curve.
RESO
STEP: 0 - 10
Adjusts the effect character intensity.
Other than STEP: 1 - 10
SENS
-10 - -1, 1 - 10 Adjusts the effect sensitivity.
FREQ
EXCITE: 1 - 5 Adjusts the frequency.
F-WAH: 1 - 20 Adjusts wah effect center frequency.
LOWBST
0 - 10 Emphasizes the low frequency range.
SIZE
1 - 10 Adjusts the spatial width.
WETLVL
0 - 30 Adjusts the mix amount of the effect sound.
DRYLVL
0 - 30 Adjusts the mix amount of the direct sound.
DIRMIX
0 - 20 Adjusts the mix amount of the direct sound.
R MODE
Table 4 Selects the change type and width.