Specifications

Effect Parameters
ZOOM PS-04 111
DUAL algorithm
● COMP module
● MIC PRE module
● 3 BAND EQ module
● DOUBLING module
TYPE Parameter
COMP L/r
Keeps the dynamic range consistent.
THRESH RATIO ATTACK LEVEL
LIMIT L/r
Controls the signal peeks.
THRESH RATIO RELEAS LEVEL
Parameter Setting range Description
THRESH
-24 - 0 Adjusts the sensitivity.
RATIO
COMP: 1 - 26
Adjusts the compression degree of the signal.
LIMIT: 1 - 54, ∞
ATTACK
0 - 10 Adjusts the compression attack speed.
LEVEL
0 - 12 Adjusts the module output level.
RELEAS
0 - 10 Adjusts the time delay between the threshold and compression finish.
TYPE Parameter
MICPRE L/r
Preamp for external mic.
COLOR TONE LEVEL
Parameter Setting range Description
COLOR
1 - 6 Specifies the response. (Table 7 of MIC algorithm)
TONE
0 - 10 Adjusts the tone.
LEVEL
1 - 8 Adjusts the module output level.
TYPE Parameter
EQ L/r
Three-band equalizer.
HIGH MID LOW LEVEL
Parameter Setting range Description
HIGH
-12 - 12 Boosts/cuts the high-frequency range.
MID
-12 - 12 Boosts/cuts the mid-frequency range.
LOW
-12 - 12 Boosts/cuts the low-frequency range.
LEVEL
1 - 8 Adjusts the module output level.
TYPE Parameter
DOUBL L/r
Doubling that allows the delay time to be set in 1-ms steps up to 100 ms.
TIME TONE MIX
Parameter Setting range Description
TIME
1 - 100 Adjusts the delay time.
TONE
0 - 10 Adjusts the tone.
MIX
0 - 30 Adjusts the mix amount of the effect.