Specifications

Appendix
112 ZOOM PS-04
● TOTAL module
MASTERING algorithm
● MULTI COMP module
● NORMALIZER module
● 3 BAND EQ module
See the GUITAR/BASS algorithm.
● DIMENSION module
● TOTAL module
See the GUITAR/BASS algorithm.
TYPE Parameter
PATLVL
Adjusts the patch volume level.
PATLVL
ZNR L/r
Cuts noise during performance pauses.
ZNR L/r
Parameter Setting range Description
PATLVL
1 - 30 Adjusts the patch volume level.
ZNR L/r
OFF, 1 - 30 Adjusts the sensitivity.
TYPE Parameter
M-COMP
Divides the signal into three frequency bands, and specifies the compression and the mix amount each.
XOVRLo XOVRHi SNSHi SNSMID SNSLOW MIXHi MIXMID MIXLOW
Parameter Setting range Description
XOVRLo
50 - 14000 Adjusts the frequency for bass/midrange division.
XOVRHi
50 - 14000 Adjusts the frequency for midrange/treble division.
SNSHi
0 - 24 Adjusts the compressor input sensitivity for the treble range.
SNSMID
0 - 24 Adjusts the compressor input sensitivity for the midrange.
SNSLOW
0 - 24 Adjusts the compressor input sensitivity for the bass range.
MIXHi
OFF, -24 - 6 Adjusts the treble mix amount.
MIXMID
OFF, -24 - 6 Adjusts the midrange mix amount.
MIXLOW
OFF, -24 - 6 Adjusts the bass mix amount.
TYPE Parameter
NORMLIZEr
Set the input level of the MULTI COMP module.
GAIN
Parameter Setting range Description
GAIN
-12 - 12 Adjusts the level.
TYPE Parameter
DIMENSIOn
Produces spatial width.
RISE_1 RISE_2
Parameter Setting range Description
RISE_1
0 - 30 Adjusts the emphasizing degree of the stereo component.
RISE_2
0 - 30 Adjusts the spaciousness that includes the monaural component.