Specifications

12 ZOOM PS-04
Listening to the Demo Song
This section shows how to play the demo song stored on the supplied SmartMedia card.
N OTE
The demo song is write-protected. During playback you can change the level, panning,
and other parameters, but you cannot store the changed settings.
1. Connect the monitoring system and the PS-04, and insert the supplied
SmartMedia card into the PS-04.
Before switching the power on, turn the volume control of the monitoring system down.
2. Set the [ON/OFF] switch on the side panel of the PS-04 to "ON".
Project information saved on the SmartMedia card is automatically loaded. When the supplied
SmartMedia card has been inserted, the demo song project will be loaded.
3. Press the [R/P] key.
The key lights up and playback of the demo song starts.
4. To stop playback, press the [R/P] key once more.
The key goes out, and the recorder stops.
H INT
If desired, you can use the faders 1 – 4 during playback to adjust the level of audio tracks
1 – 4. To adjust the level of the drum or bass track, press the [RHYTHM] key and then use
faders 1 and 2.
[ON/OFF] switch