Specifications

Quick Guide
18 ZOOM PS-04
4. Operate faders 1 and 2 to adjust the playback volume of the pattern.
In RHYTHM mode, fader 1 controls the drum volume and fader 2 the bass volume. To monitor
only the drum track of the pattern, slide fader 2 fully down.
5. To change the tempo, operate faders 3 and 4.
The current tempo value (BPM) appears on the display. Fader 3 changes the setting in units of 10
BPM, and fader 4 in units of 0.1 BPM. The original display will return after a while when you
have finished using the faders. By pressing the status key 3 or 4, you can check the current tempo
setting.
N OTE
• The tempo set here applies to all patterns.
• When recording while playing a pattern, you should set the tempo before starting to
record the audio track. If you change the tempo after recording the audio track, there will
be a mismatch between the recorded audio and the rhythm tempo.
6. To stop playback, press the [R/P] key once more.
7. Press the [EXIT] key to return to the AUDIO mode top screen.
To return from other modes to the AUDIO mode, the [EXIT] key is used.
H INT
The PS-04 automatically saves your progress (settings and recorded contents) when you
switch to another project or turn power off. There is no need to perform any special
storage steps.
Fader 1 Fader 2
Current tempo setting
Fader 3 or 4
BPM=13
BPM=13
0*0