Specifications

Step 2: Recording the first track
ZOOM PS-04 19
Step 2: Recording the first track
Specify the input source and the track on which to record, and start the recording process.
2-1 Selecting the input source
The PS-04 lets you select the [INPUT] jack, [LINE IN] jack, or built-in mic as input source for
recording on the audio tracks. First select the source and then adjust the recording level.
1. From the AUDIO mode top screen, press the [TRACK PARAMETER] key.
The track parameter screen appears. This screen gives access to various input and track related
settings. The first time you call up the screen, input is selected as operation target, and the
currently selected input source is shown.
During input source selection, the status keys and faders operate as follows.
N OTE
• The function of the faders depends on the currently selected screen of the PS-04.
• Switching to a different screen and moving a fader there will not affect the fader setting
of the previous screen, because fader settings are saved individually for each screen.
2. Use the status keys 1 – 4 to select the input source.
Depending on which input source is selected, the display changes as follows. (The "REC"
indication for the source changes from flashing to constantly on.)
INPUT
INPUT
Currently selected input source
Shows the currently
selected input source
Status keys 3/4 select
[LINE IN] jack as input source.
Faders 3/4 adjust recording level for
si
g
nal from [LINE IN] jack.
Status key 2 selects
[INPUT] jack as input source
Status key 1 selects
built-in mic as input source.
Fader 1 adjusts recording
level for signal from built-in mic.
Fader 2 adjusts recording
level for signal from [INPUT] jack.