Specifications

Quick Guide
28 ZOOM PS-04
4. Turn the dial to adjust the setting value.
4-3 Applying the send/return effect
The send/return effect is an effect that works on all tracks of the integrated mixer. Either reverb, delay,
or chorus can be selected for this effect. The illustration below shows the signal flow for the send/return
effect.
The intensity of the send/return effect can be adjusted individually for each track by setting the
send level (the level of the signal supplied to the send/return effect).
1. Press the [EFFECT] key repeatedly to bring up the indication "SEND" on the
display.
The indication "SEND" is shown for a few seconds, and then the patch currently selected for the
send/return effect is shown. (This screen is called the send/return effect top screen.)
H INT
Repeatedly pressing the [EFFECT] key toggles between the insert effect top screen and
the send/return effect top screen.
2. Turn the dial to select the patch.
The send/return effect has 40 patch slots, of which 30 are preprogrammed. For information on the
various patches that are available, see the list in the last section of this documentation (→ p. 119).
3. When you have selected the patch, press the [EXIT] key to return to the AUDIO
mode top screen.
Send/return effect
[OUTPUT] jack
Send/return effect patch
TIGHT
TIGHT
0