Specifications

Quick Guide

32 ZOOM PS-04

In the default condition, the setting is "CR" (Current) which means that the currently selected

V-take is the bounce target. When bounce is carried out in this condition, the content of the bounce

source V-take will be erased. You must therefore specify a separate V-take as bounce target.

Turn the dial to select the number of the V-take to be used as bounce target.

When you select a number, bounce will be carried out onto that V-take of the selected track. In this

example, select "10" (V-take 10).

When the setting has been made, press the [EXIT] key twice to return to the

AUDIO mode top screen.

5-3

Carrying out mixdown (bounce)

Select tracks 1 and 2 to record the stereo mix.

Press the [U] key to return the recorder to the start.

While holding down status key 1, press status key 2, so that the "REC"

indication for tracks 1 and 2 is visible.

To record on two tracks simultaneously, press both status keys together to set the tracks to the

recording standby mode. Only tracks 1 and 2 or tracks 3 and 4 can be combined.

Press the [BOUNCE] key.

The bounce function is enabled, and the indication "BOUNCE" appears on the display. In this

condition, the stereo mix (the signal as it appears at the [OUTPUT] jack) will be sent to V-takes 10

of tracks 1 and 2.

TAKE